Find 5 safety hazards in each of the following photos
The following photos were staged under the supervison of a Safety Professional. Don't try this at home.
Next
Next
Next
Next
This one has a bonus hazard! (Find 6)
Next
You found all the hazards! Great Job!
Correct!
Objects placed in front of an emergency exit creates a serious life safety hazard by obstructing a required egress route. In an emergency, even partial blockage can delay evacuation, increase panic, and prevent safe and rapid exit from the area. Emergency exits must remain completely clear and immediately accessible at all times. No items should ever be placed in front of or within exit pathways. Egress routes must be visibly clear, unobstructed, and regularly inspected to ensure compliance with safety and fire code requirements. Any obstruction should be removed immediately upon discovery, and proper housekeeping practices should be maintained to prevent recurrence.
Correct!
Materials spilled out of boxes and left on the ground create a clear trip-and-fall hazard and can lead to injuries such as sprains, strains, or falls. Loose items may also become damaged or create additional hazards if they obstruct walkways or work areas. All materials should be kept properly contained and stored in suitable containers. Any spills or dropped items must be cleaned up immediately, and damaged boxes should be replaced to prevent recurrence. Maintaining good housekeeping practices is essential to ensure a safe and organized work environment.
Correct!
A power cord running across the floor in front of a forklift creates a serious trip, entanglement, and equipment damage hazard. Forklifts can easily run over or snag cords, which may lead to sudden jolts, loss of load stability, or damage to electrical equipment. For pedestrians or other operators in the area, exposed cords also increase the risk of tripping and falling. All cords and hoses should be routed away from active travel paths or properly protected using cable covers, overhead routing, or designated crossings designed for vehicle traffic. If a cord must cross a work area, the area should be controlled, marked, and evaluated to ensure safe separation from forklift routes. Maintaining clear, unobstructed floor paths is essential for safe material handling operations. When not in use, cords should be stored away properly.
Correct!
Flammables placed in front of a space heater create a high fire risk. Heat sources can easily ignite combustible materials such as paper, cardboard, chemicals, or packaging, leading to rapid fire spread and serious injury or property damage. All flammable and combustible materials must be kept at a safe distance from heaters and other ignition sources. Space heaters should only be used in approved locations with proper clearances maintained at all times. Keeping the area around heaters free of materials is a critical control measure to prevent fires and ensure a safe work environment.
Correct!
All materials should be stored fully within the boundaries of shelving units, with no sharp or rigid objects extending outward. Where overhang cannot be avoided, the area must be clearly marked and guarded, and frequently accessed walkways should remain free of obstructions at all times. Routine inspections should be conducted to identify and correct improper storage.
Correct!
Climbing on shelving is unsafe and creates a high risk of falls, tip-overs, and falling objects. Shelving units are not designed to support the dynamic weight and movement of a person, and using them as a ladder can cause the unit to shift, collapse, or drop stored materials. This can result in serious injuries to the person climbing or others nearby.
Employees must never climb or stand on shelving. Approved access equipment such as ladders or step stools should always be used when retrieving items from elevated storage. Ensure equipment is in good condition and positioned on a stable surface before use.
Correct!
Housekeeping issues can create avoidable slip, trip, and pest hazards. Even small items or debris can cause someone to lose footing, especially in high-traffic areas or where visibility is reduced. Spilled or missed waste can also attract pests and contribute to an unclean work environment. Good housekeeping also increases productivity because there are dewer accidents. All waste should be properly disposed of inside designated containers. If a trash can is full, it should be emptied. Employees are expected to clean up any dropped materials immediately and maintain clear, accessible, and sanitary work areas as part of good housekeeping practices.
Correct!
Not wearing safety glasses in designated eye protection areas exposes workers to preventable injuries from flying debris, dust, chemicals, and other airborne hazards. Even routine tasks can generate unexpected projectiles or splashes that can cause serious eye injuries, including irritation, lacerations, or permanent vision damage. Safety glasses must be worn at all times where eye protection is required, as identified by signage, task-specific risk assessments, or SandPro policies. Properly fitted and appropriate-rated eye protection should be selected for the specific hazard present. Consistent use of safety glasses is a critical control measure in preventing avoidable eye injuries in the workplace.
Correct!
Not wearing impact-rated gloves when required exposes workers to preventable hand and finger injuries, especially in tasks involving pinch points, crushing hazards, tools, or heavy materials. Without proper hand protection, even minor incidents can result in cuts, bruises, fractures, or more serious crush injuries. Impact gloves are specifically designed to reduce force from sudden contact, falling objects, or equipment movement, and should be worn whenever there is a risk of hands being struck, caught, or compressed. Proper glove selection and consistent use are essential to reducing hand injury risk on site.
Let's review
Always use A-frame ladders in the fully open position with spreaders locked. Ensure the ladder is placed on a stable, level surface and maintain three points of contact while climbing. If a leaning ladder is required, use an extension ladder that is designed for that purpose and properly secured. Ladders should always be stored in designated storage areas out of the way, secured to prevent falling or obstruction, and kept free of surrounding clutter to ensure safe access when needed.
Correct!
Not using a seatbelt in a forklift significantly increases the risk of serious injury or death in the event of a tip-over or sudden impact. Forklifts are designed so that the operator remains secured within the protective structure of the cab. Without a seatbelt, an operator may be ejected or attempt to jump out during a tip-over, which is a leading cause of fatal forklift accidents. The seatbelt must be worn at all times while operating a forklift, regardless of travel distance or speed. It works in combination with the forklift’s overhead guard and stability design to keep the operator within the protected zone. Safe operation practices, including proper load handling, speed control, and awareness of surface conditions, should always be followed along with consistent seatbelt use.
Correct!
A blocked fire extinguisher is a critical safety hazard because it prevents immediate access during an emergency when seconds matter. If an extinguisher is obstructed by equipment, storage, or other materials, it may not be reachable when a small fire first starts, allowing it to grow into a much more dangerous situation. Fire extinguishers must always remain clearly visible, accessible, and unobstructed at all times. Nothing should be stored in front of them or within their access path, and they should be mounted or placed in their designated locations as required by site safety and fire protection standards. Regular inspections should be conducted to ensure access is maintained and any obstructions are removed immediately.
Correct!
Heavy objects stored on top of a shelf create a serious falling-object and stability hazard. If items are too heavy or improperly placed, they can shift or fall, potentially striking someone below and causing head, neck, or back injuries. Overloading the top of shelving also raises the center of gravity, increasing the risk that the entire unit could tip over, especially if bumped or unevenly loaded. Heavy materials should always be stored on lower, more stable shelves to maintain proper weight distribution and reduce tipping risk. Only lightweight, infrequently accessed items should be placed on upper shelves, and shelving units should never be used in a way that compromises their rated load limits. Maintaining proper storage practices helps ensure both structural stability and safe access to materials.
Correct!
Using a cell phone while operating a forklift is a serious distraction hazard that significantly increases the risk of collisions, dropped loads, and pedestrian injuries. Forklift operation requires full attention to surroundings, load stability, and equipment controls; even a brief distraction can lead to loss of control or failure to notice hazards such as people, racking, or obstructions. Cell phone use is prohibited while operating powered industrial equipment. Operators must stop the forklift in a safe, designated location, lower the load, and engage the parking brake before using a phone or any other device. Maintaining full situational awareness at all times is essential to safe forklift operation and preventing preventable incidents.
Correct!
Objects over-hanging a shelf creates a falling-object hazard and an unstable storage condition. The overhanging load can be easily bumped or shifted, causing the box to fall and potentially strike someone below, resulting in head, foot, or upper body injuries. All materials should be stored fully within the shelf boundaries, with no overhang. Heavier or frequently handled items should be positioned toward the center of the shelf for stability. If a box does not fit properly, it should be repositioned, reorganized, or stored in a more appropriate location rather than left in an unstable condition. Proper storage practices are essential to maintaining a safe work environment.
Correct!
Unnecessary tools left laying around create a housekeeping hazard that can lead to slips, trips, and falls. Tools left in work areas can also become damaged, lost, or improperly used by others who may not be aware they are out of place. All tools should be removed from the work area when not in use and returned to designated storage locations. Keeping workspaces clear and organized helps maintain safe walking surfaces, reduces distractions, and ensures tools are readily available when needed. Good housekeeping is a shared responsibility and is essential for maintaining a safe and efficient work environment.
Correct!
A cable running across a walkway creates a clear trip hazard and can lead to falls, injuries, and equipment damage. Foot traffic may not always notice low-lying cables, especially in busy or low-visibility areas, increasing the risk of someone catching a foot and losing balance. All cables should be routed away from pedestrian paths whenever possible. If crossing a walkway is unavoidable, the cable must be properly secured and protected using approved cable covers, ramps, or overhead routing to eliminate exposure. Maintaining clear and unobstructed walking surfaces is essential for preventing slips, trips, and falls in the workplace.
Correct!
A broom leaning across a work area creates an unnecessary trip and obstruction hazard. Even lightweight tools can cause workers to stumble, lose balance, or step awkwardly, especially in busy or low-visibility areas. It also increases the chance of the broom being knocked over, creating further clutter or blocking access routes. All tools should be properly stored when not in use, either in designated storage locations, tool racks, or secured against a wall in a way that prevents them from falling into walkways or work zones. Maintaining clear and unobstructed travel paths is a key part of good housekeeping and helps reduce preventable slips, trips, and falls.
Correct!
When the forks do not fully support the load, the weight becomes unevenly distributed, increasing the risk of the crate tipping, shifting, or falling during lifting or movement. This can lead to struck-by injuries, crushed feet or hands, and damage to materials or equipment.
Pallet jacks must always be positioned so the forks are fully inserted and evenly centered under the load before lifting. If the load cannot be fully supported, it should be repositioned, broken down, or lifted using appropriate equipment designed for the task. Never attempt to raise or move a partially supported load. Always ensure the load is stable and secure prior to jacking and transport.
Let's Review
Housekeeping issues can create avoidable slip, trip, and pest hazards. Even small items or debris can cause someone to lose footing, especially in high-traffic areas or where visibility is reduced. Spilled or missed waste can also attract pests and contribute to an unclean work environment. Good housekeeping also increases productivity because there are dewer accidents. All waste should be properly disposed of inside designated containers. If a trash can is full, it should be emptied. Employees are expected to clean up any dropped materials immediately and maintain clear, accessible, and sanitary work areas as part of good housekeeping practices.
Let's Review
Using a cell phone while operating a forklift is a serious distraction hazard that significantly increases the risk of collisions, dropped loads, and pedestrian injuries. Forklift operation requires full attention to surroundings, load stability, and equipment controls; even a brief distraction can lead to loss of control or failure to notice hazards such as people, racking, or obstructions. Cell phone use is prohibited while operating powered industrial equipment. Operators must stop the forklift in a safe, designated location, lower the load, and engage the parking brake before using a phone or any other device. Maintaining full situational awareness at all times is essential to safe forklift operation and preventing preventable incidents.
Correct!
An open drawer creates a trip, bump, and strike hazard in the workplace. Employees walking past may not notice it in time, leading to collisions that can cause bruises, cuts, or more serious injuries. Open drawers can also cause carts or equipment to snag, and in some cases may contribute to tipping if multiple drawers are extended or weight is unevenly distributed. Drawers should always be fully closed when not actively in use. This includes toolboxes, cabinets, desks, and storage units. Keeping storage closed maintains clear walkways, reduces clutter hazards, and helps ensure a safer and more organized work environment.
Let's Review
Heavy objects stored on top of a shelf create a serious falling-object and stability hazard. If items are too heavy or improperly placed, they can shift or fall, potentially striking someone below and causing head, neck, or back injuries. Overloading the top of shelving also raises the center of gravity, increasing the risk that the entire unit could tip over, especially if bumped or unevenly loaded. Heavy materials should always be stored on lower, more stable shelves to maintain proper weight distribution and reduce tipping risk. Only lightweight, infrequently accessed items should be placed on upper shelves, and shelving units should never be used in a way that compromises their rated load limits. Maintaining proper storage practices helps ensure both structural stability and safe access to materials.
Correct!
A power cord running across the floor in front of a forklift creates a serious trip, entanglement, and equipment damage hazard. Forklifts can easily run over or snag cords, which may lead to sudden jolts, loss of load stability, or damage to electrical equipment. For pedestrians or other operators in the area, exposed cords also increase the risk of tripping and falling. All cords and hoses should be routed away from active travel paths or properly protected using cable covers, overhead routing, or designated crossings designed for vehicle traffic. If a cord must cross a work area, the area should be controlled, marked, and evaluated to ensure safe separation from forklift routes. Maintaining clear, unobstructed floor paths is essential for safe material handling operations. When not in use, cords should be stored away properly.
Correct!
Plugging a space heater into a power strip is a serious electrical and fire hazard. Space heaters draw high current and can easily overload power strips, which are typically not rated for that level of continuous load. This can cause overheating, melting of components, electrical fires, or failure of the power strip and connected wiring. Space heaters should always be plugged directly into a properly rated wall outlet. They must never be used with extension cords, power strips, or multi-outlet adapters. Following proper electrical use guidelines is essential to preventing preventable fire and shock hazards.
Correct!
Always use A-frame ladders in the fully open position with spreaders locked. Ensure the ladder is placed on a stable, level surface and maintain three points of contact while climbing. If a leaning ladder is required, use an extension ladder that is designed for that purpose and properly secured. Ladders should always be stored in designated storage areas out of the way, secured to prevent falling or obstruction, and kept free of surrounding clutter to ensure safe access when needed.
Find 5 safety hazards in each of the following photos
Casey Loving
Created on April 28, 2026
Start designing with a free template
Discover more than 1500 professional designs like these:
View
Interactive Image with Information
View
Interactive Human Body Image
View
Interactive Artwork Image
View
Interactive Product Image
View
Essential Square Interactive Image
View
Akihabara Vertical Interactive Image
View
Interactive Nature Image
Explore all templates
Transcript
Find 5 safety hazards in each of the following photos
The following photos were staged under the supervison of a Safety Professional. Don't try this at home.
Next
Next
Next
Next
This one has a bonus hazard! (Find 6)
Next
You found all the hazards! Great Job!
Correct!
Objects placed in front of an emergency exit creates a serious life safety hazard by obstructing a required egress route. In an emergency, even partial blockage can delay evacuation, increase panic, and prevent safe and rapid exit from the area. Emergency exits must remain completely clear and immediately accessible at all times. No items should ever be placed in front of or within exit pathways. Egress routes must be visibly clear, unobstructed, and regularly inspected to ensure compliance with safety and fire code requirements. Any obstruction should be removed immediately upon discovery, and proper housekeeping practices should be maintained to prevent recurrence.
Correct!
Materials spilled out of boxes and left on the ground create a clear trip-and-fall hazard and can lead to injuries such as sprains, strains, or falls. Loose items may also become damaged or create additional hazards if they obstruct walkways or work areas. All materials should be kept properly contained and stored in suitable containers. Any spills or dropped items must be cleaned up immediately, and damaged boxes should be replaced to prevent recurrence. Maintaining good housekeeping practices is essential to ensure a safe and organized work environment.
Correct!
A power cord running across the floor in front of a forklift creates a serious trip, entanglement, and equipment damage hazard. Forklifts can easily run over or snag cords, which may lead to sudden jolts, loss of load stability, or damage to electrical equipment. For pedestrians or other operators in the area, exposed cords also increase the risk of tripping and falling. All cords and hoses should be routed away from active travel paths or properly protected using cable covers, overhead routing, or designated crossings designed for vehicle traffic. If a cord must cross a work area, the area should be controlled, marked, and evaluated to ensure safe separation from forklift routes. Maintaining clear, unobstructed floor paths is essential for safe material handling operations. When not in use, cords should be stored away properly.
Correct!
Flammables placed in front of a space heater create a high fire risk. Heat sources can easily ignite combustible materials such as paper, cardboard, chemicals, or packaging, leading to rapid fire spread and serious injury or property damage. All flammable and combustible materials must be kept at a safe distance from heaters and other ignition sources. Space heaters should only be used in approved locations with proper clearances maintained at all times. Keeping the area around heaters free of materials is a critical control measure to prevent fires and ensure a safe work environment.
Correct!
All materials should be stored fully within the boundaries of shelving units, with no sharp or rigid objects extending outward. Where overhang cannot be avoided, the area must be clearly marked and guarded, and frequently accessed walkways should remain free of obstructions at all times. Routine inspections should be conducted to identify and correct improper storage.
Correct!
Climbing on shelving is unsafe and creates a high risk of falls, tip-overs, and falling objects. Shelving units are not designed to support the dynamic weight and movement of a person, and using them as a ladder can cause the unit to shift, collapse, or drop stored materials. This can result in serious injuries to the person climbing or others nearby.
Employees must never climb or stand on shelving. Approved access equipment such as ladders or step stools should always be used when retrieving items from elevated storage. Ensure equipment is in good condition and positioned on a stable surface before use.
Correct!
Housekeeping issues can create avoidable slip, trip, and pest hazards. Even small items or debris can cause someone to lose footing, especially in high-traffic areas or where visibility is reduced. Spilled or missed waste can also attract pests and contribute to an unclean work environment. Good housekeeping also increases productivity because there are dewer accidents. All waste should be properly disposed of inside designated containers. If a trash can is full, it should be emptied. Employees are expected to clean up any dropped materials immediately and maintain clear, accessible, and sanitary work areas as part of good housekeeping practices.
Correct!
Not wearing safety glasses in designated eye protection areas exposes workers to preventable injuries from flying debris, dust, chemicals, and other airborne hazards. Even routine tasks can generate unexpected projectiles or splashes that can cause serious eye injuries, including irritation, lacerations, or permanent vision damage. Safety glasses must be worn at all times where eye protection is required, as identified by signage, task-specific risk assessments, or SandPro policies. Properly fitted and appropriate-rated eye protection should be selected for the specific hazard present. Consistent use of safety glasses is a critical control measure in preventing avoidable eye injuries in the workplace.
Correct!
Not wearing impact-rated gloves when required exposes workers to preventable hand and finger injuries, especially in tasks involving pinch points, crushing hazards, tools, or heavy materials. Without proper hand protection, even minor incidents can result in cuts, bruises, fractures, or more serious crush injuries. Impact gloves are specifically designed to reduce force from sudden contact, falling objects, or equipment movement, and should be worn whenever there is a risk of hands being struck, caught, or compressed. Proper glove selection and consistent use are essential to reducing hand injury risk on site.
Let's review
Always use A-frame ladders in the fully open position with spreaders locked. Ensure the ladder is placed on a stable, level surface and maintain three points of contact while climbing. If a leaning ladder is required, use an extension ladder that is designed for that purpose and properly secured. Ladders should always be stored in designated storage areas out of the way, secured to prevent falling or obstruction, and kept free of surrounding clutter to ensure safe access when needed.
Correct!
Not using a seatbelt in a forklift significantly increases the risk of serious injury or death in the event of a tip-over or sudden impact. Forklifts are designed so that the operator remains secured within the protective structure of the cab. Without a seatbelt, an operator may be ejected or attempt to jump out during a tip-over, which is a leading cause of fatal forklift accidents. The seatbelt must be worn at all times while operating a forklift, regardless of travel distance or speed. It works in combination with the forklift’s overhead guard and stability design to keep the operator within the protected zone. Safe operation practices, including proper load handling, speed control, and awareness of surface conditions, should always be followed along with consistent seatbelt use.
Correct!
A blocked fire extinguisher is a critical safety hazard because it prevents immediate access during an emergency when seconds matter. If an extinguisher is obstructed by equipment, storage, or other materials, it may not be reachable when a small fire first starts, allowing it to grow into a much more dangerous situation. Fire extinguishers must always remain clearly visible, accessible, and unobstructed at all times. Nothing should be stored in front of them or within their access path, and they should be mounted or placed in their designated locations as required by site safety and fire protection standards. Regular inspections should be conducted to ensure access is maintained and any obstructions are removed immediately.
Correct!
Heavy objects stored on top of a shelf create a serious falling-object and stability hazard. If items are too heavy or improperly placed, they can shift or fall, potentially striking someone below and causing head, neck, or back injuries. Overloading the top of shelving also raises the center of gravity, increasing the risk that the entire unit could tip over, especially if bumped or unevenly loaded. Heavy materials should always be stored on lower, more stable shelves to maintain proper weight distribution and reduce tipping risk. Only lightweight, infrequently accessed items should be placed on upper shelves, and shelving units should never be used in a way that compromises their rated load limits. Maintaining proper storage practices helps ensure both structural stability and safe access to materials.
Correct!
Using a cell phone while operating a forklift is a serious distraction hazard that significantly increases the risk of collisions, dropped loads, and pedestrian injuries. Forklift operation requires full attention to surroundings, load stability, and equipment controls; even a brief distraction can lead to loss of control or failure to notice hazards such as people, racking, or obstructions. Cell phone use is prohibited while operating powered industrial equipment. Operators must stop the forklift in a safe, designated location, lower the load, and engage the parking brake before using a phone or any other device. Maintaining full situational awareness at all times is essential to safe forklift operation and preventing preventable incidents.
Correct!
Objects over-hanging a shelf creates a falling-object hazard and an unstable storage condition. The overhanging load can be easily bumped or shifted, causing the box to fall and potentially strike someone below, resulting in head, foot, or upper body injuries. All materials should be stored fully within the shelf boundaries, with no overhang. Heavier or frequently handled items should be positioned toward the center of the shelf for stability. If a box does not fit properly, it should be repositioned, reorganized, or stored in a more appropriate location rather than left in an unstable condition. Proper storage practices are essential to maintaining a safe work environment.
Correct!
Unnecessary tools left laying around create a housekeeping hazard that can lead to slips, trips, and falls. Tools left in work areas can also become damaged, lost, or improperly used by others who may not be aware they are out of place. All tools should be removed from the work area when not in use and returned to designated storage locations. Keeping workspaces clear and organized helps maintain safe walking surfaces, reduces distractions, and ensures tools are readily available when needed. Good housekeeping is a shared responsibility and is essential for maintaining a safe and efficient work environment.
Correct!
A cable running across a walkway creates a clear trip hazard and can lead to falls, injuries, and equipment damage. Foot traffic may not always notice low-lying cables, especially in busy or low-visibility areas, increasing the risk of someone catching a foot and losing balance. All cables should be routed away from pedestrian paths whenever possible. If crossing a walkway is unavoidable, the cable must be properly secured and protected using approved cable covers, ramps, or overhead routing to eliminate exposure. Maintaining clear and unobstructed walking surfaces is essential for preventing slips, trips, and falls in the workplace.
Correct!
A broom leaning across a work area creates an unnecessary trip and obstruction hazard. Even lightweight tools can cause workers to stumble, lose balance, or step awkwardly, especially in busy or low-visibility areas. It also increases the chance of the broom being knocked over, creating further clutter or blocking access routes. All tools should be properly stored when not in use, either in designated storage locations, tool racks, or secured against a wall in a way that prevents them from falling into walkways or work zones. Maintaining clear and unobstructed travel paths is a key part of good housekeeping and helps reduce preventable slips, trips, and falls.
Correct!
When the forks do not fully support the load, the weight becomes unevenly distributed, increasing the risk of the crate tipping, shifting, or falling during lifting or movement. This can lead to struck-by injuries, crushed feet or hands, and damage to materials or equipment.
Pallet jacks must always be positioned so the forks are fully inserted and evenly centered under the load before lifting. If the load cannot be fully supported, it should be repositioned, broken down, or lifted using appropriate equipment designed for the task. Never attempt to raise or move a partially supported load. Always ensure the load is stable and secure prior to jacking and transport.
Let's Review
Housekeeping issues can create avoidable slip, trip, and pest hazards. Even small items or debris can cause someone to lose footing, especially in high-traffic areas or where visibility is reduced. Spilled or missed waste can also attract pests and contribute to an unclean work environment. Good housekeeping also increases productivity because there are dewer accidents. All waste should be properly disposed of inside designated containers. If a trash can is full, it should be emptied. Employees are expected to clean up any dropped materials immediately and maintain clear, accessible, and sanitary work areas as part of good housekeeping practices.
Let's Review
Using a cell phone while operating a forklift is a serious distraction hazard that significantly increases the risk of collisions, dropped loads, and pedestrian injuries. Forklift operation requires full attention to surroundings, load stability, and equipment controls; even a brief distraction can lead to loss of control or failure to notice hazards such as people, racking, or obstructions. Cell phone use is prohibited while operating powered industrial equipment. Operators must stop the forklift in a safe, designated location, lower the load, and engage the parking brake before using a phone or any other device. Maintaining full situational awareness at all times is essential to safe forklift operation and preventing preventable incidents.
Correct!
An open drawer creates a trip, bump, and strike hazard in the workplace. Employees walking past may not notice it in time, leading to collisions that can cause bruises, cuts, or more serious injuries. Open drawers can also cause carts or equipment to snag, and in some cases may contribute to tipping if multiple drawers are extended or weight is unevenly distributed. Drawers should always be fully closed when not actively in use. This includes toolboxes, cabinets, desks, and storage units. Keeping storage closed maintains clear walkways, reduces clutter hazards, and helps ensure a safer and more organized work environment.
Let's Review
Heavy objects stored on top of a shelf create a serious falling-object and stability hazard. If items are too heavy or improperly placed, they can shift or fall, potentially striking someone below and causing head, neck, or back injuries. Overloading the top of shelving also raises the center of gravity, increasing the risk that the entire unit could tip over, especially if bumped or unevenly loaded. Heavy materials should always be stored on lower, more stable shelves to maintain proper weight distribution and reduce tipping risk. Only lightweight, infrequently accessed items should be placed on upper shelves, and shelving units should never be used in a way that compromises their rated load limits. Maintaining proper storage practices helps ensure both structural stability and safe access to materials.
Correct!
A power cord running across the floor in front of a forklift creates a serious trip, entanglement, and equipment damage hazard. Forklifts can easily run over or snag cords, which may lead to sudden jolts, loss of load stability, or damage to electrical equipment. For pedestrians or other operators in the area, exposed cords also increase the risk of tripping and falling. All cords and hoses should be routed away from active travel paths or properly protected using cable covers, overhead routing, or designated crossings designed for vehicle traffic. If a cord must cross a work area, the area should be controlled, marked, and evaluated to ensure safe separation from forklift routes. Maintaining clear, unobstructed floor paths is essential for safe material handling operations. When not in use, cords should be stored away properly.
Correct!
Plugging a space heater into a power strip is a serious electrical and fire hazard. Space heaters draw high current and can easily overload power strips, which are typically not rated for that level of continuous load. This can cause overheating, melting of components, electrical fires, or failure of the power strip and connected wiring. Space heaters should always be plugged directly into a properly rated wall outlet. They must never be used with extension cords, power strips, or multi-outlet adapters. Following proper electrical use guidelines is essential to preventing preventable fire and shock hazards.
Correct!
Always use A-frame ladders in the fully open position with spreaders locked. Ensure the ladder is placed on a stable, level surface and maintain three points of contact while climbing. If a leaning ladder is required, use an extension ladder that is designed for that purpose and properly secured. Ladders should always be stored in designated storage areas out of the way, secured to prevent falling or obstruction, and kept free of surrounding clutter to ensure safe access when needed.