BOMB LMRSQUIZ
start
Is a programming cable always required to clone radio programming from one radio to another?
00:00
00:30
No, but only when using computer-based programming software
No, cloning can be done between radios without a programming cable
No, cloning can be done between radios without a programming cable
Yes, but only when cloning more than two radios
Yes, a programming cable is always required for cloning
Which statement correctly describes weather and emergency features across Performa radios?
00:00
00:30
The Performa 450 includes both, while the Performa 400 includes emergency only
All Performa radios include both weather and emergency features
Performas do not include these features
The Performa 450 includes emergency only, while the Performa 400 includes both weather and emergency features
Which statement best describes the antenna design of LMRS radios?
00:00
00:30
LMRS radios support external high-gain antennas via adapters
LMRS radios allow antenna upgrades only through manufacturer servicing
LMRS radios use fixed, non-removable antennas
LMRS radios have fully removable and upgradable antennas
What data is transferred during the cloning process between radios?
00:00
00:30
Only the channel list is copied; other settings must be configured manually
All programmed settings are copied, not just the channel list
Only user-accessible settings are copied, not system configurations
Only frequencies and privacy codes are copied
What is the maximum transmit power for our LMRS radios?
00:00
00:30
1 Watt
2.5 Watts
2 Watts
5 Watts
LMRS radios can be used with repeaters or base stations—much like GMRS. What is the most important consideration customers must address before using this setup?
00:00
00:30
Licensing requirements
Equipment compatibility with repeaters
Battery capacity for extended range
Antenna height restrictions
Which functions can be configured using the Cobra Programming Software?
00:00
00:30
Radio settings, frequency assignments, privacy codes, channel configurations, and user-accessible feature permissions
User-accessible feature permissions only
Radio settings and frequency assignments only
Privacy codes and channel configurations only
Which methods are valid for programming multiple radios efficiently?
00:00
00:30
Tap-to-clone functionality between radios
Cloning via USB-C connection directly between two radios without cloning mode
Using a 6-dock charger connected via USB-C and cloning from a programmed radio in cloning mode to multiple receiving radios also in cloning mode
Programming each radio individually through on-device menus
A customer purchased Performa 450s and needs help getting started with programming. What key information should you gather?
00:00
00:30
Whether they have a programming cable, their licensing/setup status, their intended system size and team structure, and whether privacy codes or channel segmentation are needed
Their desired audio volume levels, alert tones, keypad lock preferences, and backlight timeout settings
Their physical coverage area, terrain type, antenna needed
Their preferred channel names, display brightness settings, battery type, and accessory preferences
A customer has been assigned a licensed frequency outside standard configurations. How should this be implemented on their radios?
00:00
00:30
Use custom programming, either preloaded by Cobra or provided via CPS profile for customer deployment
Enter the frequency manually through the radio interface
Adjust an existing channel to approximate the assigned frequency
Simply have the customer enter the frequency into the CPS to load onto the radio
BombNeutralized
Back to Home
try again
BOMB LMRSQUIZ
Jennifer Korn
Created on April 14, 2026
Start designing with a free template
Discover more than 1500 professional designs like these:
View
Flags Game
View
Chaotic Chef Quiz
View
News quiz mobile
View
News Quiz
View
Startup Speed Quiz
View
Flash Challenge Quiz
View
Dunk the clown quiz
Explore all templates
Transcript
BOMB LMRSQUIZ
start
Is a programming cable always required to clone radio programming from one radio to another?
00:00
00:30
No, but only when using computer-based programming software
No, cloning can be done between radios without a programming cable
No, cloning can be done between radios without a programming cable
Yes, but only when cloning more than two radios
Yes, a programming cable is always required for cloning
Which statement correctly describes weather and emergency features across Performa radios?
00:00
00:30
The Performa 450 includes both, while the Performa 400 includes emergency only
All Performa radios include both weather and emergency features
Performas do not include these features
The Performa 450 includes emergency only, while the Performa 400 includes both weather and emergency features
Which statement best describes the antenna design of LMRS radios?
00:00
00:30
LMRS radios support external high-gain antennas via adapters
LMRS radios allow antenna upgrades only through manufacturer servicing
LMRS radios use fixed, non-removable antennas
LMRS radios have fully removable and upgradable antennas
What data is transferred during the cloning process between radios?
00:00
00:30
Only the channel list is copied; other settings must be configured manually
All programmed settings are copied, not just the channel list
Only user-accessible settings are copied, not system configurations
Only frequencies and privacy codes are copied
What is the maximum transmit power for our LMRS radios?
00:00
00:30
1 Watt
2.5 Watts
2 Watts
5 Watts
LMRS radios can be used with repeaters or base stations—much like GMRS. What is the most important consideration customers must address before using this setup?
00:00
00:30
Licensing requirements
Equipment compatibility with repeaters
Battery capacity for extended range
Antenna height restrictions
Which functions can be configured using the Cobra Programming Software?
00:00
00:30
Radio settings, frequency assignments, privacy codes, channel configurations, and user-accessible feature permissions
User-accessible feature permissions only
Radio settings and frequency assignments only
Privacy codes and channel configurations only
Which methods are valid for programming multiple radios efficiently?
00:00
00:30
Tap-to-clone functionality between radios
Cloning via USB-C connection directly between two radios without cloning mode
Using a 6-dock charger connected via USB-C and cloning from a programmed radio in cloning mode to multiple receiving radios also in cloning mode
Programming each radio individually through on-device menus
A customer purchased Performa 450s and needs help getting started with programming. What key information should you gather?
00:00
00:30
Whether they have a programming cable, their licensing/setup status, their intended system size and team structure, and whether privacy codes or channel segmentation are needed
Their desired audio volume levels, alert tones, keypad lock preferences, and backlight timeout settings
Their physical coverage area, terrain type, antenna needed
Their preferred channel names, display brightness settings, battery type, and accessory preferences
A customer has been assigned a licensed frequency outside standard configurations. How should this be implemented on their radios?
00:00
00:30
Use custom programming, either preloaded by Cobra or provided via CPS profile for customer deployment
Enter the frequency manually through the radio interface
Adjust an existing channel to approximate the assigned frequency
Simply have the customer enter the frequency into the CPS to load onto the radio
BombNeutralized
Back to Home
try again