WHICH CARD SHOULD YOU PLAY TO WIN THIS TRICK? (❤️ IS TRUMP)
REVEAL
TRICK
HAND
$1600
Name two out of three Pieces of documentation which shall be maintained by the owner/operator Under ASTM standards
1. Initial acceptance inspection report2. Acceptance inspection report/s for all major course modifications3. Written policies, procedures and operational practices
ANSWER
Select the appropriate choice from the bottom row to complete the sequence in the top row.
ANSWER
If there are 133 wires in 3/8” 7x19 GAC and the breaking strength is listed by the manufacturer as 14,400 lbs. and one strand of wires is completely broken what is the estimated breaking strength of the wire rope in service? (CALCULATOR ALLOWED, ANSWERS ±10LBS ALLOWED)
ANSWER
12,342 Lbs.
Define Tensile Strength
The force applied in-line to pull a component to the point it breaks
ANSWER
WHY DID THIS FAIL?
ANSWER
OVERGROWTH
3/8” converted to a decimal fraction is:
ANSWER
0.375
$800
If wheel A turns Clockwise what direction do wheels B and C turn?
B = COUNTER-CLOCKWISE C=CLOCKWISE
ANSWER
If a bolt has a safe working load of 20,000 lbs when the force is applied in-line (100%). What would be the reduced working load limit when the force is applied at a 90 degree angle?
ANSWER
5,000 lbs (25%)
A supplemental drawing used with a conventional working drawing that gives a complete and more exact description of the items in use is called the:
ANSWER
Detail Drawing
$1200
Please identify the bolt size specified for attaching the D Plate Anchor Connector:
ANSWER
1 /2” A 325
3/8” converted to a decimal fraction is:
ANSWER
0.375
$2000
What is the Mechanical Advantage of this System?
ANSWER
5:1
Wood poles used as critical element support structures shall comply with prevailing editions:
American National Standard for Wood Products (ANSI 05.1 and 05.2)
ANSWER
WHY DID THIS FAIL?
ANSWER
LUMBER CRACK DUE TO TREE GROWTH
A site plan is a plan view (as viewed from above) that shows
Property boundaries, buildings, roads, and elevation marks.
ANSWER
REVEAL
The ASTM collection of standards for amusement rides is frequently referred to as What
ANSWER
F-24 Standards
Which is correct?
ANSWER
#1
$400
Identify the bead size of the welds required for proper fabrication
ANSWER
1/4"
TRUE OR FALSE: Climbing to inspect equipment and components shall be done when safe and accessible to an inspector.
ANSWER
TRUE
If a bolt has a safe working load of 20,000 lbs when the force is applied in-line (100%). What would be the reduced working load limit when the force is applied at a 90 degree angle?
ANSWER
5,000 lbs (25%)
$400
Which type of Fire Extinguisher should never be used on an oil fire?
ANSWER
WATER
On completed construction projects, who is normally responsible for ensuring that the installation complies with the provided drawings and/or building codes during a commission inspection?
ANSWER
The commissioning inspector
$2000
If 5/16” 7x7 wire rope has a minimum breaking strength of 9,200 lbs. and two wires are broken, what is the new minimum breaking strength for the wire rope (round to the nearest whole number)?
ANSWER
8824 lbs.
WHAT GOES IN THE YELLOW BOX?
ANSWER
45°
Metric Fasteners have a number on the head such as 8.8 or 12.9. This mark?
Identifies the strength of the fastener
ANSWER
$2000
WHAT IS THE ASTM Standard Practice for Design of Amusement Rides and Devices?
ANSWER
2291
A site plan is a plan view (as viewed from above) that shows
Property boundaries, buildings, roads, and elevation marks.
ANSWER
$800
You have been hired to conduct a third-party inspection on a newly constructed element. What type of inspection are you conducting?
ANSWER
ACCEPTANCE
REVEAL
DEFINE FALL FACTOR
ANSWER
$800
IN MANUFACTUING, WHAT IS THE NAME OF THE PROCESS BY WHICH A LIQUID MATERIAL is introduced into a mold and allowed to solidify BEFORE then pushed out once solid as a completed part?
ANSWER
CASTING
REVEAL
DEFINE FALL FACTOR
ANSWER
$1600
Continuous grade lines that show the height above or below a given reference point DESCRIBE WHAT?
ANSWER
SITE CONTOURS
WHY DID THIS FAIL?
ANSWER
CRACK
$1200
It is the responsibility of the _____________ to ensure that you as an inspector are qualified and if required registered with a jurisdictional authority to inspect a structure deemed an Amusement Ride prior to inspecting a ride in that region.
YOU, THE INSPECTION BODY, OR YOUR EMPLOYER
ANSWER
If blueprints show fastener attachments, why can’t the contractor have just used the cheapest fasteners they could find?
"The written specifications may demand a specific grade or coated fastener as well as size tomeet a standard, local building code and or corrosion resistance."
ANSWER
Which is correct?
ANSWER
#1
REVEAL
If the breaking strength of a forged bolt is 10,000 lbs. and we want to proof test the bolt to 20% of the breaking strength, how many US tons of force would need to be applied?
ANSWER
Components that penetrate the pole shall be at least how many inches from the top of the poles unless the pole is properly capped or otherwise treated
ANSWER
12 Inches
$1200
You have a piece of wood that measures 2’ long x 2” wide. You need to rip that piece into smaller parts 1⁄2” wide by 2’ long. Knowing that you will lose some of the wood as you cut, how many 1⁄2” strips can you get out of the 2’ x 2” piece?
ANSWER
$2000
WHAT SHOULD YOU REFERENCE FOR A SMALLER VIEW OF THE DETAIL SHOWN HERE?
ANSWER
SHEET 4
$1200
WHAT IS THE NAME OF THIS DEVICE?
TENSION METER
ANSWER
WHAT MEASUREMENT IS D?
ANSWER
1-7/8"
Components that penetrate the pole shall be at least how many inches from the top of the poles unless the pole is properly capped or otherwise treated
ANSWER
12 Inches
Wood poles used as critical element support structures shall comply with prevailing editions:
American National Standard for Wood Products (ANSI 05.1 and 05.2)
ANSWER
$1200
To lift the 150 lb. weight illustrated, you need to pull down with a force of about _____ pounds.
ANSWER
75 (2:1)
WHY DID THIS FAIL?
ANSWER
OVERGROWTH
$2000
In the circuit shown, how many switches need to be closed to light up at least one bulb?
ANSWER
TWO
SAE is an identifying mark of a fastener that was made to what standard?
Society of Automotive Engineers
ANSWER
WHAT GOES IN THE YELLOW BOX?
ANSWER
45°
Name two of the three requirements for verifying life safety system integrity, as specified in the ANSI/ACCT Standards?
1. Presence of a redundant system, 2. system meets or exceeds a verifiable life safety standard, 3. system is proof tested or engineered.
ANSWER
WHY DID THIS FAIL?
ANSWER
LUMBER CRACK DUE TO TREE GROWTH
While ACCT standards specify minimum standards for participant equipment; what standard shall be used for employees performing professional inspections on a course or structure?
The standard required by law for employees working at height in the country, state,providences or otherwise having legal jurisdiction.
ANSWER
Select the appropriate choice from the bottom row to complete the sequence in the top row.
ANSWER
Newly Installed Critical Guy anchors need to be properly designed and stamped by a licensed engineer or proof tested to a minimum of____ the expected load.
ANSWER
2x
Define Tensile Strength
The force applied in-line to pull a component to the point it breaks
ANSWER
$800
IS THE LIGHT ON OR OFF?
ANSWER
OFF
On completed construction projects, who is normally responsible for ensuring that the installation complies with the provided drawings and/or building codes during a commission inspection?
ANSWER
The commissioning inspector
$400
A 10-foot long class IV wood pole can hold a uniform load of 420 pounds per ft. what total load can the beam support?
ANSWER
4,200 lbs.
SAE is an identifying mark of a fastener that was made to what standard?
Society of Automotive Engineers
ANSWER
NFPA is an acronym for...
The National Fire Protection Association
ANSWER
While ACCT standards specify minimum standards for participant equipment; what standard shall be used for employees performing professional inspections on a course or structure?
The standard required by law for employees working at height in the country, state,providences or otherwise having legal jurisdiction.
ANSWER
REVEAL
The ASTM collection of standards for amusement rides is frequently referred to as What
ANSWER
F-24 Standards
WHAT IS THIS CALLED?
ANSWER
BIRDCAGE
$400
True or False: An installation can vary from the ACCT or ASTM standards as long as it has been stamped by a structural engineer and testing to the ASTM standards of those provided by the engineer have been completed and are properly documented
ANSWER
TRUE
All new installations shall comply with what version of the ANSI/ACCT Standard
The current Published Edition at the time of installation
ANSWER
$1600
Which of the following is not a typical part of an electric circuit A. Power source B. Conductor C. Load D. Fillet
ANSWER
D. Fillet
$400
To lift the 100 lb. weight illustrated below, you need to pull with a force of about _____ pounds.
ANSWER
100 (1:1)
$1600
On a zip line using 1⁄2” sized wire rope with an ultimate breaking strength of 26,600 lbs. which of the following combination of dead and live loads would be acceptable and pass inspection.
ANSWER
4,160 lbs.
$800
To lift the 100 lb. weight, you need to pull up with a force of about _____ lbs.
ANSWER
50 (2:1)
If there are 133 wires in 3/8” 7x19 GAC and the breaking strength is listed by the manufacturer as 14,400 lbs. and one strand of wires is completely broken what is the estimated breaking strength of the wire rope in service? (CALCULATOR ALLOWED, ANSWERS ±10LBS ALLOWED)
ANSWER
12,342 Lbs.
Name two of the three requirements for verifying life safety system integrity, as specified in the ANSI/ACCT Standards?
1. Presence of a redundant system, 2. system meets or exceeds a verifiable life safety standard, 3. system is proof tested or engineered.
ANSWER
What is the best tool for assessing that a 10’ vertically oriented wood pole is straight up and down?
ANSWER
Plumb Bob
$1600
To lift the 200 lb. weight illustrated, you need to pull down with an approximate force of about _____ pounds.
ANSWER
67 (3:1)
WHY DID THIS FAIL?
ANSWER
CRACK
TRUE OR FALSE: Climbing to inspect equipment and components shall be done when safe and accessible to an inspector.
ANSWER
TRUE
A supplemental drawing used with a conventional working drawing that gives a complete and more exact description of the items in use is called the:
ANSWER
Detail Drawing
Name 2 reasons a Carabiner may fail inspection
1. Corrosion or excessive wear2. Improperly operating gate and/or locking mechanism3. Minimum strength requirement marked on the component is too low
ANSWER
$2000
Draw it: in a hydraulic/pneumatic assembly diagram, a hydraulic cylinder
ANSWER
Metric Fasteners have a number on the head such as 8.8 or 12.9. This mark?
Identifies the strength of the fastener
ANSWER
WHAT IS THIS CALLED?
ANSWER
BIRDCAGE
NFPA is an acronym for...
The National Fire Protection Association
ANSWER
$400
what is the technical term for a cutaway view of an object or structure?
ANSWER
Sectional Drawing
All new installations shall comply with what version of the ANSI/ACCT Standard
The current Published Edition at the time of installation
ANSWER
If blueprints show fastener attachments, why can’t the contractor have just used the cheapest fasteners they could find?
"The written specifications may demand a specific grade or coated fastener as well as size tomeet a standard, local building code and or corrosion resistance."
ANSWER
REVEAL
USING YOUR HANDS, SHOW A LAP JOINT IN WELDING
ANSWER
WHAT MEASUREMENT IS D?
ANSWER
1-7/8"
Name 2 reasons a Carabiner may fail inspection
1. Corrosion or excessive wear2. Improperly operating gate and/or locking mechanism3. Minimum strength requirement marked on the component is too low
ANSWER
What is the best tool for assessing that a 10’ vertically oriented wood pole is straight up and down?
ANSWER
Plumb Bob
$1600
In a first class lever, how could you increase the amount of mechanical advantage?
Move the load closer to the fulcrum / the effort further from the fulcrum
ANSWER
Newly Installed Critical Guy anchors need to be properly designed and stamped by a licensed engineer or proof tested to a minimum of____ the expected load.
JEOPARDY - ACCT ICE EDITION
Building With Wood, LLC
Created on February 25, 2026
Start designing with a free template
Discover more than 1500 professional designs like these:
View
Essential Business Proposal
View
Project Roadmap Timeline
View
Step-by-Step Timeline: How to Develop an Idea
View
Artificial Intelligence History Timeline
View
Momentum: Onboarding Escape Game
View
Momentum: Manager Guide
View
Wizardry Letter
Explore all templates
Transcript
ACCT ICE EDITION
DOUBLE JEOPARDY
Weights and Measurments
JOBSITE AND CONSTRUCTION
SPECIALTY HARDWARE
PERSONAL PROTECTION EQUIPMENT
WHAT'S WRONG WITH THIS PICTURE
BLUEPRINTS AND TECHNICAL DRAWINGS
WHAT'S WRONG WITH THIS PICTURE
BLUEPRINTS & TECHNICAL DRAWINGS
SPECIALTY HARDWARE
WEIGHTS & MEASURES
JOBSITE & CONSTRUCTION
PPE
DOUBLE JEOPARDY
DOUBLE JEOPARDY
HAUL SYSTEMS
TECHNICAL DRAWINGS
QUICK MATHS
TRADE SKILLS NOT TYPICALLY USED
REGULATORY JARGON
GRAB BAG
TECHNICAL DRAWINGS
REGULATORY JARGON
TRADE SKILLS NOT TYPICALLY USED
GRAB BAG
HAUL SYSTEMS
QUICK MATHS
$400
$400
$400
$400
$400
$400
$800
$800
$800
$800
$800
$800
$1200
$1200
$1200
$1200
$1200
$1200
$1600
$1600
$1600
$1600
$1600
$1600
$2000
$2000
$2000
$2000
$2000
$2000
FINAL JEOPARDY
FINAL JEOPARDY
MAKE YOUR WAGER
CATEGORY: ESSENTIAL NON-WORK SKILLS
WHICH CARD SHOULD YOU PLAY TO WIN THIS TRICK? (❤️ IS TRUMP)
REVEAL
TRICK
HAND
$1600
Name two out of three Pieces of documentation which shall be maintained by the owner/operator Under ASTM standards
1. Initial acceptance inspection report2. Acceptance inspection report/s for all major course modifications3. Written policies, procedures and operational practices
ANSWER
Select the appropriate choice from the bottom row to complete the sequence in the top row.
ANSWER
If there are 133 wires in 3/8” 7x19 GAC and the breaking strength is listed by the manufacturer as 14,400 lbs. and one strand of wires is completely broken what is the estimated breaking strength of the wire rope in service? (CALCULATOR ALLOWED, ANSWERS ±10LBS ALLOWED)
ANSWER
12,342 Lbs.
Define Tensile Strength
The force applied in-line to pull a component to the point it breaks
ANSWER
WHY DID THIS FAIL?
ANSWER
OVERGROWTH
3/8” converted to a decimal fraction is:
ANSWER
0.375
$800
If wheel A turns Clockwise what direction do wheels B and C turn?
B = COUNTER-CLOCKWISE C=CLOCKWISE
ANSWER
If a bolt has a safe working load of 20,000 lbs when the force is applied in-line (100%). What would be the reduced working load limit when the force is applied at a 90 degree angle?
ANSWER
5,000 lbs (25%)
A supplemental drawing used with a conventional working drawing that gives a complete and more exact description of the items in use is called the:
ANSWER
Detail Drawing
$1200
Please identify the bolt size specified for attaching the D Plate Anchor Connector:
ANSWER
1 /2” A 325
3/8” converted to a decimal fraction is:
ANSWER
0.375
$2000
What is the Mechanical Advantage of this System?
ANSWER
5:1
Wood poles used as critical element support structures shall comply with prevailing editions:
American National Standard for Wood Products (ANSI 05.1 and 05.2)
ANSWER
WHY DID THIS FAIL?
ANSWER
LUMBER CRACK DUE TO TREE GROWTH
A site plan is a plan view (as viewed from above) that shows
Property boundaries, buildings, roads, and elevation marks.
ANSWER
REVEAL
The ASTM collection of standards for amusement rides is frequently referred to as What
ANSWER
F-24 Standards
Which is correct?
ANSWER
#1
$400
Identify the bead size of the welds required for proper fabrication
ANSWER
1/4"
TRUE OR FALSE: Climbing to inspect equipment and components shall be done when safe and accessible to an inspector.
ANSWER
TRUE
If a bolt has a safe working load of 20,000 lbs when the force is applied in-line (100%). What would be the reduced working load limit when the force is applied at a 90 degree angle?
ANSWER
5,000 lbs (25%)
$400
Which type of Fire Extinguisher should never be used on an oil fire?
ANSWER
WATER
On completed construction projects, who is normally responsible for ensuring that the installation complies with the provided drawings and/or building codes during a commission inspection?
ANSWER
The commissioning inspector
$2000
If 5/16” 7x7 wire rope has a minimum breaking strength of 9,200 lbs. and two wires are broken, what is the new minimum breaking strength for the wire rope (round to the nearest whole number)?
ANSWER
8824 lbs.
WHAT GOES IN THE YELLOW BOX?
ANSWER
45°
Metric Fasteners have a number on the head such as 8.8 or 12.9. This mark?
Identifies the strength of the fastener
ANSWER
$2000
WHAT IS THE ASTM Standard Practice for Design of Amusement Rides and Devices?
ANSWER
2291
A site plan is a plan view (as viewed from above) that shows
Property boundaries, buildings, roads, and elevation marks.
ANSWER
$800
You have been hired to conduct a third-party inspection on a newly constructed element. What type of inspection are you conducting?
ANSWER
ACCEPTANCE
REVEAL
DEFINE FALL FACTOR
ANSWER
$800
IN MANUFACTUING, WHAT IS THE NAME OF THE PROCESS BY WHICH A LIQUID MATERIAL is introduced into a mold and allowed to solidify BEFORE then pushed out once solid as a completed part?
ANSWER
CASTING
REVEAL
DEFINE FALL FACTOR
ANSWER
$1600
Continuous grade lines that show the height above or below a given reference point DESCRIBE WHAT?
ANSWER
SITE CONTOURS
WHY DID THIS FAIL?
ANSWER
CRACK
$1200
It is the responsibility of the _____________ to ensure that you as an inspector are qualified and if required registered with a jurisdictional authority to inspect a structure deemed an Amusement Ride prior to inspecting a ride in that region.
YOU, THE INSPECTION BODY, OR YOUR EMPLOYER
ANSWER
If blueprints show fastener attachments, why can’t the contractor have just used the cheapest fasteners they could find?
"The written specifications may demand a specific grade or coated fastener as well as size tomeet a standard, local building code and or corrosion resistance."
ANSWER
Which is correct?
ANSWER
#1
REVEAL
If the breaking strength of a forged bolt is 10,000 lbs. and we want to proof test the bolt to 20% of the breaking strength, how many US tons of force would need to be applied?
ANSWER
Components that penetrate the pole shall be at least how many inches from the top of the poles unless the pole is properly capped or otherwise treated
ANSWER
12 Inches
$1200
You have a piece of wood that measures 2’ long x 2” wide. You need to rip that piece into smaller parts 1⁄2” wide by 2’ long. Knowing that you will lose some of the wood as you cut, how many 1⁄2” strips can you get out of the 2’ x 2” piece?
ANSWER
$2000
WHAT SHOULD YOU REFERENCE FOR A SMALLER VIEW OF THE DETAIL SHOWN HERE?
ANSWER
SHEET 4
$1200
WHAT IS THE NAME OF THIS DEVICE?
TENSION METER
ANSWER
WHAT MEASUREMENT IS D?
ANSWER
1-7/8"
Components that penetrate the pole shall be at least how many inches from the top of the poles unless the pole is properly capped or otherwise treated
ANSWER
12 Inches
Wood poles used as critical element support structures shall comply with prevailing editions:
American National Standard for Wood Products (ANSI 05.1 and 05.2)
ANSWER
$1200
To lift the 150 lb. weight illustrated, you need to pull down with a force of about _____ pounds.
ANSWER
75 (2:1)
WHY DID THIS FAIL?
ANSWER
OVERGROWTH
$2000
In the circuit shown, how many switches need to be closed to light up at least one bulb?
ANSWER
TWO
SAE is an identifying mark of a fastener that was made to what standard?
Society of Automotive Engineers
ANSWER
WHAT GOES IN THE YELLOW BOX?
ANSWER
45°
Name two of the three requirements for verifying life safety system integrity, as specified in the ANSI/ACCT Standards?
1. Presence of a redundant system, 2. system meets or exceeds a verifiable life safety standard, 3. system is proof tested or engineered.
ANSWER
WHY DID THIS FAIL?
ANSWER
LUMBER CRACK DUE TO TREE GROWTH
While ACCT standards specify minimum standards for participant equipment; what standard shall be used for employees performing professional inspections on a course or structure?
The standard required by law for employees working at height in the country, state,providences or otherwise having legal jurisdiction.
ANSWER
Select the appropriate choice from the bottom row to complete the sequence in the top row.
ANSWER
Newly Installed Critical Guy anchors need to be properly designed and stamped by a licensed engineer or proof tested to a minimum of____ the expected load.
ANSWER
2x
Define Tensile Strength
The force applied in-line to pull a component to the point it breaks
ANSWER
$800
IS THE LIGHT ON OR OFF?
ANSWER
OFF
On completed construction projects, who is normally responsible for ensuring that the installation complies with the provided drawings and/or building codes during a commission inspection?
ANSWER
The commissioning inspector
$400
A 10-foot long class IV wood pole can hold a uniform load of 420 pounds per ft. what total load can the beam support?
ANSWER
4,200 lbs.
SAE is an identifying mark of a fastener that was made to what standard?
Society of Automotive Engineers
ANSWER
NFPA is an acronym for...
The National Fire Protection Association
ANSWER
While ACCT standards specify minimum standards for participant equipment; what standard shall be used for employees performing professional inspections on a course or structure?
The standard required by law for employees working at height in the country, state,providences or otherwise having legal jurisdiction.
ANSWER
REVEAL
The ASTM collection of standards for amusement rides is frequently referred to as What
ANSWER
F-24 Standards
WHAT IS THIS CALLED?
ANSWER
BIRDCAGE
$400
True or False: An installation can vary from the ACCT or ASTM standards as long as it has been stamped by a structural engineer and testing to the ASTM standards of those provided by the engineer have been completed and are properly documented
ANSWER
TRUE
All new installations shall comply with what version of the ANSI/ACCT Standard
The current Published Edition at the time of installation
ANSWER
$1600
Which of the following is not a typical part of an electric circuit A. Power source B. Conductor C. Load D. Fillet
ANSWER
D. Fillet
$400
To lift the 100 lb. weight illustrated below, you need to pull with a force of about _____ pounds.
ANSWER
100 (1:1)
$1600
On a zip line using 1⁄2” sized wire rope with an ultimate breaking strength of 26,600 lbs. which of the following combination of dead and live loads would be acceptable and pass inspection.
ANSWER
4,160 lbs.
$800
To lift the 100 lb. weight, you need to pull up with a force of about _____ lbs.
ANSWER
50 (2:1)
If there are 133 wires in 3/8” 7x19 GAC and the breaking strength is listed by the manufacturer as 14,400 lbs. and one strand of wires is completely broken what is the estimated breaking strength of the wire rope in service? (CALCULATOR ALLOWED, ANSWERS ±10LBS ALLOWED)
ANSWER
12,342 Lbs.
Name two of the three requirements for verifying life safety system integrity, as specified in the ANSI/ACCT Standards?
1. Presence of a redundant system, 2. system meets or exceeds a verifiable life safety standard, 3. system is proof tested or engineered.
ANSWER
What is the best tool for assessing that a 10’ vertically oriented wood pole is straight up and down?
ANSWER
Plumb Bob
$1600
To lift the 200 lb. weight illustrated, you need to pull down with an approximate force of about _____ pounds.
ANSWER
67 (3:1)
WHY DID THIS FAIL?
ANSWER
CRACK
TRUE OR FALSE: Climbing to inspect equipment and components shall be done when safe and accessible to an inspector.
ANSWER
TRUE
A supplemental drawing used with a conventional working drawing that gives a complete and more exact description of the items in use is called the:
ANSWER
Detail Drawing
Name 2 reasons a Carabiner may fail inspection
1. Corrosion or excessive wear2. Improperly operating gate and/or locking mechanism3. Minimum strength requirement marked on the component is too low
ANSWER
$2000
Draw it: in a hydraulic/pneumatic assembly diagram, a hydraulic cylinder
ANSWER
Metric Fasteners have a number on the head such as 8.8 or 12.9. This mark?
Identifies the strength of the fastener
ANSWER
WHAT IS THIS CALLED?
ANSWER
BIRDCAGE
NFPA is an acronym for...
The National Fire Protection Association
ANSWER
$400
what is the technical term for a cutaway view of an object or structure?
ANSWER
Sectional Drawing
All new installations shall comply with what version of the ANSI/ACCT Standard
The current Published Edition at the time of installation
ANSWER
If blueprints show fastener attachments, why can’t the contractor have just used the cheapest fasteners they could find?
"The written specifications may demand a specific grade or coated fastener as well as size tomeet a standard, local building code and or corrosion resistance."
ANSWER
REVEAL
USING YOUR HANDS, SHOW A LAP JOINT IN WELDING
ANSWER
WHAT MEASUREMENT IS D?
ANSWER
1-7/8"
Name 2 reasons a Carabiner may fail inspection
1. Corrosion or excessive wear2. Improperly operating gate and/or locking mechanism3. Minimum strength requirement marked on the component is too low
ANSWER
What is the best tool for assessing that a 10’ vertically oriented wood pole is straight up and down?
ANSWER
Plumb Bob
$1600
In a first class lever, how could you increase the amount of mechanical advantage?
Move the load closer to the fulcrum / the effort further from the fulcrum
ANSWER
Newly Installed Critical Guy anchors need to be properly designed and stamped by a licensed engineer or proof tested to a minimum of____ the expected load.
ANSWER
2x