Rechargeable Lithium Vacuum Sealer
Quick Start Guide
SKU: KAVSGEN2-USB
Start
INDEX
Common Problem
#X
Package Contents
List of Contents - KickAss Rechargeable Lithium Vacuum Sealer
- Water-resistant Carry Bag x 1
- Bag Cutters x 3
- External Vacuum Pipe x 1
- Vacuum Bags x 6
- USB-C Cable x 1
Safety Information
- Use the vacuum sealer in dry, cool areas. Avoid exposing it to moisture, heat, or wet environments.
- Do not leave the vacuum sealer unattended while it is operating.
- Always turn off and unplug the device when not in use.
- Do not attempt to modify or alter the vacuum sealer in any way.
- Do not try to disassemble or repair the device yourself. If a part is damaged or not working, please contact KickAss Products.
- Misuse of this product may cause injury or damage. Follow all instructions carefully.
- Do not touch the sealing strip right after use — it becomes hot during operation.Avoid pressing the buttons while the lid is open, especially after switching the device on.
Safety Information
- Keep the vacuum sealer out of reach of children. The device is not a toy.
- Do not allow children to use or play with the device.
- Keep pets away from the vacuum sealer during and after use.
- Do not use chemicals or harsh cleaners on the device.
- If any part of the vacuum sealer or accessory comes into contact with liquid, dry it immediately with a soft cloth or paper towel.
- Unlock the lid after each use to avoid putting pressure on the sealing gasket and foam.
- Only use compatible vacuum bags on this device (up to 30cm wide).
- Do not vacuum and seal foods with high amount of liquid, as this can make the hose and machine difficult to clean.
Device Overview
1. Lock Release Buttons 2. Battery Level Indicator 3. Mode Control Button 4. Mode Control Indicator 5. Carrying Strap
Device Overview
6. Caging Tab 7. Air Suction Holes 8. Vacuum Chamber 9. Sealing Strip
Device Overview
10. Power Toggle Switch and USB-C Charging Port 11. External Vacuum Hose Socket
12
12. Bag Cutter Slot
The KickAss Rechargeable Lithium Vacuum Sealer has three mode functions:
Setup Guide
The Automatic Vacuum and Seal Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Automatic Vacuum and Seal Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Automatic Vacuum and Seal Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Automatic Vacuum and Seal Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Automatic Vacuum and Seal Function:6. Turn on the POWER TOGGLE SWITCH.7. Press the VACUUM button.8. The device will automatically vacuum and seal the bag.9. Wait for the indicator light to turn off, indicating that the operation is complete.
Setup Guide
The Automatic Vacuum and Seal Function:10. Turn off the POWER TOGGLE SWITCH.11. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
The Manual Vacuum Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Manual Vacuum Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Manual Vacuum Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Manual Vacuum Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Manual Vacuum Function:6. Turn on the POWER TOGGLE SWITCH.7. Press and hold the MANUAL button.8. The device will start the vacuum process. 9. Release the button once the desired vacuum level is reached.
Setup Guide
The Manual Vacuum Function:10. Press the SEAL button. 11. Wait for the indicator light to turn off, indicating that the operation is complete.
Setup Guide
The Manual Vacuum Function:12. Turn off the POWER TOGGLE SWITCH.13. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
The Automatic Sealing Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Automatic Sealing Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Automatic Sealing Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Automatic Sealing Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Automatic Sealing Function:6. Turn on the POWER TOGGLE SWITCH.7. Press the SEAL button.8. The device will start the sealing process. 9. Once the light turns off, the sealing is finished.
Setup Guide
The Automatic Sealing Function:10. Turn off the POWER TOGGLE SWITCH.11. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
Using the External Vacuum Pipe:1. Insert the provided external vacuum pipe to the socket located at the back of the vacuum sealer.
Setup Guide
Using the External Vacuum Pipe:2. Hold the vacuum attachment against the suction port of a vacuum compatible jar, containter, bag, or canister with the attachment, ensuring a good seal has been made.
Setup Guide
Using the External Vacuum Pipe:3. Turn on the POWER TOGGLE SWITCH.4. Press and hold the MANUAL button.5. The device will start the vacuum process. 6. Release the button once the desired vacuum level is reached.
Setup Guide
Using the External Vacuum Pipe:7. Turn off the POWER TOGGLE SWITCH.8. Remove the external vacuum hose from the bag and the vacuum sealer.
Need further assistance?
If you require further information not included in this guide, don’t worry - We’re here to help. Please contact us via the applicable Support Form provided below:
Rechargeable Vacuum Sealer
To be sure that your inquiry goes to the Technical Team. Please make sure to select Technical Assistance as the enquiry type.
Go Back to Index
END
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT
Charging Indicator Guide
The 3-light LED Battery Indicator will show the charging progress
Device is charging: currently between 0% to 33%
Device is charging:currently between 33% to 66%
Device is charging:currently between 66% to 99%
Device is fully charged.
Tip: From a depleted state, a full charge takes around 2 hours.
OK
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT
QSG - KAVSGEN2-USB
Reece Attard
Created on August 13, 2025
Start designing with a free template
Discover more than 1500 professional designs like these:
View
Vision Board
View
Periodic Table
View
SWOT Challenge: Classify Key Factors
View
Explainer Video: Keys to Effective Communication
View
Explainer Video: AI for Companies
View
Corporate CV
View
Flow Presentation
Explore all templates
Transcript
Rechargeable Lithium Vacuum Sealer
Quick Start Guide
SKU: KAVSGEN2-USB
Start
INDEX
Common Problem
#X
Package Contents
List of Contents- KickAss Rechargeable Lithium Vacuum Sealer
- Water-resistant Carry Bag x 1
- Bag Cutters x 3
- External Vacuum Pipe x 1
- Vacuum Bags x 6
- USB-C Cable x 1
Safety Information
Safety Information
Device Overview
1. Lock Release Buttons 2. Battery Level Indicator 3. Mode Control Button 4. Mode Control Indicator 5. Carrying Strap
Device Overview
6. Caging Tab 7. Air Suction Holes 8. Vacuum Chamber 9. Sealing Strip
Device Overview
10. Power Toggle Switch and USB-C Charging Port 11. External Vacuum Hose Socket
12
12. Bag Cutter Slot
The KickAss Rechargeable Lithium Vacuum Sealer has three mode functions:
Setup Guide
The Automatic Vacuum and Seal Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Automatic Vacuum and Seal Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Automatic Vacuum and Seal Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Automatic Vacuum and Seal Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Automatic Vacuum and Seal Function:6. Turn on the POWER TOGGLE SWITCH.7. Press the VACUUM button.8. The device will automatically vacuum and seal the bag.9. Wait for the indicator light to turn off, indicating that the operation is complete.
Setup Guide
The Automatic Vacuum and Seal Function:10. Turn off the POWER TOGGLE SWITCH.11. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
The Manual Vacuum Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Manual Vacuum Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Manual Vacuum Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Manual Vacuum Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Manual Vacuum Function:6. Turn on the POWER TOGGLE SWITCH.7. Press and hold the MANUAL button.8. The device will start the vacuum process. 9. Release the button once the desired vacuum level is reached.
Setup Guide
The Manual Vacuum Function:10. Press the SEAL button. 11. Wait for the indicator light to turn off, indicating that the operation is complete.
Setup Guide
The Manual Vacuum Function:12. Turn off the POWER TOGGLE SWITCH.13. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
The Automatic Sealing Function:1. Place food inside a compatible vacuum bag. (maximum width of 30cm)2. Leave enough space between the food and the open end of the bag.
Setup Guide
The Automatic Sealing Function:3. Open the lid of the device by pressing the LOCK RELEASE buttons at the same time.
Setup Guide
The Automatic Sealing Function: 4. Insert the open end of the bag under the caging tabs inside the vacuum chamber while ensuring that the tabs are properly in place and that the bag lies flat with no wrinkles.
Setup Guide
The Automatic Sealing Function: 5. Close the lid and press on both sides firmly until it is fully locked and unyielding.
Setup Guide
The Automatic Sealing Function:6. Turn on the POWER TOGGLE SWITCH.7. Press the SEAL button.8. The device will start the sealing process. 9. Once the light turns off, the sealing is finished.
Setup Guide
The Automatic Sealing Function:10. Turn off the POWER TOGGLE SWITCH.11. Press both lock release buttons to open the lid and remove the sealed bag.
Setup Guide
Using the External Vacuum Pipe:1. Insert the provided external vacuum pipe to the socket located at the back of the vacuum sealer.
Setup Guide
Using the External Vacuum Pipe:2. Hold the vacuum attachment against the suction port of a vacuum compatible jar, containter, bag, or canister with the attachment, ensuring a good seal has been made.
Setup Guide
Using the External Vacuum Pipe:3. Turn on the POWER TOGGLE SWITCH.4. Press and hold the MANUAL button.5. The device will start the vacuum process. 6. Release the button once the desired vacuum level is reached.
Setup Guide
Using the External Vacuum Pipe:7. Turn off the POWER TOGGLE SWITCH.8. Remove the external vacuum hose from the bag and the vacuum sealer.
Need further assistance?
If you require further information not included in this guide, don’t worry - We’re here to help. Please contact us via the applicable Support Form provided below:
Rechargeable Vacuum Sealer
To be sure that your inquiry goes to the Technical Team. Please make sure to select Technical Assistance as the enquiry type.
Go Back to Index
END
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT
Charging Indicator Guide
The 3-light LED Battery Indicator will show the charging progress
Device is charging: currently between 0% to 33%
Device is charging:currently between 33% to 66%
Device is charging:currently between 66% to 99%
Device is fully charged.
Tip: From a depleted state, a full charge takes around 2 hours.
OK
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT
Setup Complete
You’ve successfully completed the setup guide of your KickAss Rechargeable Lithium Vacuum Sealer.
SETUP INDEX
HOME
END
NEED SUPPORT?
For first time use
Please fully charge the vacuum sealer before using it for the first time.
For optimal charging, use the included USB-C cable.
NEXT