P3-Anthony-6018-EN

InteractiveSetup Guide

Medley Clear

Wireless Earbuds for TV & Transmitter Set with Charging Dock

Start

Check & make sure you have everything.

Open the box

< Back

I don't have this

Got it

Transmitter

Start Over

Skip to setup >

Check & make sure you have everything.

Open the box

< Back

I don't have this

Got it

Earphone

Start Over

Skip to setup >

Check & make sure you have everything.

Open the box

< Back

I don't have this

Got it

Start Over

Power Cable

Skip to setup >

Check & make sure you have everything.

Open the box

I don't have this

< Back

Got it

Start Over

Optical (OPT) Cable

Skip to setup >

Check & make sure you have everything.

Open the box

< Back

I don't have this

Got it

Start Over

3.5mm AUX Cable

Skip to setup >

Check & make sure you have everything.

Open the box

I don't have this

< Back

Got it

Start Over

Sets of Earbud Tips (M/S)

Skip to setup >

Check & make sure you have everything.

Open the box

< Back

I don't have this

Got it

Start Over

3M Tape for Transmitter

Skip to setup >

You're ready to set up.

Let's begin!

< Back

Start setup

Start Over

< Back

It's plugged in

Start Over

After initial setup, we recommend plugging the transmitter into your TV's USB power port so that the Medley Clear turns on & off with your TV.

Plug in the transmitter

Use the provided USB-C power cable to plug the transmitter into a power source near your TV.

视 频

< Back

Power On & Connect the Earphone (1st Earphone)

Slide the power toggle from OFF to PAIR position, and press & hold the switch until both the LED on the earphone and transmitter turn solid blue.

They turn solid blue. Connected

Not working? Check the Bluetooth Environment

Start Over

视 频

< Back

No

Auto Reconnect

The provided NB18 earphone is the default 1st earphone, and will automatically reconnect whenever it is switched on. If not, simply press & hold the button to the PAIR position, and it will swiftly reconnect.

Yes

Start Over

< Back

No

Would you like to connect a 2nd earphone?

Yes

Start Over

< Back

The transmitter isin pairing mode

The transmitter isin pairing mode

Start Over

Get Transmitter into Pairing Mode

Press & hold the button at the back of the transmitter for 5 seconds or until the LED indicator for the 2nd earphone starts flashing red & blue. This means the transmitter enters the pairing mode.

视 频

The transmitter isin pairing mode

< Back

Not working? Check the Bluetooth Environment

Start Over

Get 2nd Earphone into Pairing Mode

Meanwhile, get the 2nd earphone (another NB18, or NB16) into pairing mode by pressing & holding the switch to the PAIR position. When both the LED on the earphone and transmitter turns solid blue, they are connected.

视 频

Reset the transmitter

Press & hold both the "-" & "+" buttons for about 5 seconds or until the LEDs flash pink and turn off. The transmitter will then automatically re-enter pairing mode.

Transmitter is reset

< Back

Still not pairing

Start Over

视 频

Reset the headphone

After turning it on, press & hold both “+” and “-” for 7 seconds until the red and blue LEDs are BOTH on for 2 seconds (looks PINK) to clear the paired history (you can hear "DU DU").It then enters pairing mode automatically with the LED flashing alternately red and blue.

The earphone flashes red and blue

< Back

It doesn't work

Start Over

视 频

Reset your headphone

Turn the headphone OFF. Then turn both the transmitter and the headphone on. Wait for a few seconds They should automatically reconnected.

* We take the Avantree NB18 for example. Different headphones have different resetting processes. Consult your device's user manual for directions if needed.

Reconnection successful

< Back

Need help

Start Over

视 频

My environment is clear

< Back

Start Over

Clear your environment

Wifi routers and other devices (like Samsung smart TVs) can affect the pairing process. Try unplugging or moving away from such devices to prevent interference.

TV sound is on

< Back

Start Over

Turn your TV on &start playing something

It can be anything as long as it has some kind of sound.

< Back

Check the back or side of your TV to check the available audio output ports.

Select an audio output option

(Recommended)

Optical (OPT)

AUX

RCA

Others

Start Over

Connected via optical

< Back

Start Over

Connect the transmitter to your TV via optical

Plug one end of the provided optical cable into your TV, and the other end into the transmitter's optical port.

Note: Be sure to plug in the optical cable with the correct side up, as it's directional.

< Back

Need help

"Optical" is selected

"PCM" is selected

Change your TV'ssound settings

Use your TV remote to access the sound settings, then choose the following:

Start Over

TV's Sound Settings

Settings> Sound / Audio> Output> Optical

Audio Format> PCM/Dolby off*

TV Audio Format

Headphones are not working

< Back

Start Over

Headphones are working

Check your headphones for sound

Your transmitter's "OPT" LED should now be solid white, and you should be able to hear TV audio through your headphones. If not, try adjusting the volume on your headphones.

< Back

Settings vary from brand to brand. We've included guides for some of the most popular TV brands below.

TV sound settings guide

Need help

Start Over

Settings aresuccessfully changed

Connected via AUX

< Back

Start Over

Connect the transmitterto your TV via AUX

Plug one end of the provided AUX cable into your TV, and the other end into the transmitter's AUX port.

< Back

Need help

"Headphones" is selected

"AUX" LED is solid white

Change your TV'ssound settings

Use your TV remote to access the sound settings, then choose the following:

Start Over

TV Sound Settings

The "AUX" indicator must be solid.

Settings> Sound / Audio> Output> Headphones

Headphones are not working

< Back

Start Over

Headphones are working

Check your headphones for sound

Your transmitter's "AUX" LED should now be solid white, and you should be able to hear TV audio through your headphones. If not, try adjusting the volume on your headphones.

Connected via RCA

< Back

Start Over

Connect the transmitterto your TV via RCA

Use an RCA to AUX adapter cable (not provided) to connect the RCA end to your TV and the AUX end to the transmitter. Valid RCA ports are labeled "AUDIO OUT."

Note: Contact us for a free RCA to AUX adapter if needed.

< Back

Other connection options

Not listed

Start Over

Optical port is occupied

HDMI ARC

AV Receiver

TV Box

< Back

I'll connect another way

Otherwise, you'll need to connect your Audikast another way.

If your TV's optical port is already being used...

Consider exchanging your Audikast for the Oasis Plus or Orbit Pro - they support optical bypass so you can connect both devices simultaneously.

Start Over

Connect to TV box

< Back

Start Over

Connect the transmitter to your TV via a TV box

Although not recommended, you can connect the transmitter to your TV box as a last resort.

Note: Connecting via TV box restricts audio to only what's played through the box.

< Back

Start Over

Connect the transmitter to your TV viaan AV receiver

You'll need a 6.35mm to 3.5mm AUX adapter (not provided) to connect via AVR.

Connect to AV receiver

6.35 Adapter

Note: Connecting via AVR may mute your TV's speakers.

I'll connect another way

< Back

Start Over

If your TV only has an HDMI ARC port...

You'll need to either purchase the HAX05 to connect your Audikast, or exchange your Audikast for the HDMI ARC-supporting Orbit Pro.

Otherwise, you'll need to connect your Audikast another way.

Get support

< Back

Start Over

Reach out to usfor help!

You can email us directly at support@avantree.com, or click the button below to redirect to our support page.We'll get back to you within 1 business day!

Start over

< Back

Troubleshooting

We hope you enjoy your experience with the Audikast!If you ever need anything, please don't hesitate to reach out to us at support@avantree.com

You're done!

Click here to see the full compatibility list.

Only accessible with aptX-Adaptive or Low Latency-supporting devices.Note: Airpods do not currently support this feature.

Low Latency

Hearing Aid Compatibility

Not compatible with certain models of hearing aids.

Unplug Samsung Smart TV

Samsung smart TVs tend to interfere with the connection process. Make sure to unplug it - don't just turn it off.

Turn Phone's Bluetooth Off

To avoid interference during pairing, please turn off Bluetooth on your phone & other previously connected devices.

A few important notes:

Before we start