Want to create interactive content? It’s easy in Genially!

Get started free

Genially sem título

Luis Franganito

Created on November 26, 2024

Start designing with a free template

Discover more than 1500 professional designs like these:

Create your interactive CV

Reboot Protocol

Mobile Use Simulation

College Survival Test

Learning Style Test

Dynamic Learning Quiz

Team Quiz

Explore all templates

Transcript

Luís Franganito

CEF
Line Out port (lime).
  • This port connects a headphone or a speaker. In 4-channel, 5.1-channel, and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
DisplayPort.
  • This port is for a DisplayPort-compatible devices.
CPU
  • Intel® Socket LGA1200 for 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors*
  • Supports Intel® 14nm CPU
  • Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max Technology 3.0**
*Refer to www.asus.com for CPU support list.**Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types.
Power connectors
  • These Power connectors allow you to connect your motherboard to a power supply.
  • The power supply plugs are designed to fit in only one orientation.
  • Find the proper orientation and push down firmly until the power supply plugs are fully inserted.
Power connectors
  • These Power connectors allow you to connect your motherboard to a power supply.
  • The power supply plugs are designed to fit in only one orientation.
  • Find the proper orientation and push down firmly until the power supply plugs are fully inserted.
PS/2 keyboard/mouse combo port.
  • This port is for a PS/2 mouse or keyboard.
SATA 6Gb/s ports
  • The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable.
Clear CMOS header
  • This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords.
  • To erase the RTC RAM:
    • 1. Turn OFF the computer and unplug the power cord.
    • 2. Use a metal object such as a screwdriver to short the two pins.
    • 3. Plug the power cord and turn ON the computer.
    • 4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
USB 3.2 Gen 1 header
  • The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s.
    • The USB 3.2 Gen 1 module is purchased separately.
USB 2.0 ports.
  • These 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices.
Fan headers
  • Fan headers CPU
  • The Fan headers allow you to connect fans to cool the system.
Line In port (light blue).
  • This port connects the tape, CD, DVD player, or other audio sources.
SPI TPM header
  • This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
AURA RGB header
  • The RGB header allows you to connect RGB LED strips.
    • The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m.
    • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
COM Port header
  • This header is for a serial (COM) port. Connect the serial port module cable to this header, then install the module to a slot opening at the back of the system chassis.
Fan headers
  • Fan headers Chassi
  • The Fan headers allow you to connect fans to cool the system.
USB 3.2 Gen 1 (up to 5Gbps) ports.
  • These 9-pin Universal Serial Bus (USB) ports connect to USB 3.2 Gen 1 devices.
HDMI port.
  • This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.
HDMI port.
  • This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.
Front panel audio header
  • This header is for a chassis-mounted front panel audio I/O module that supports HD audio standard. Connect one end of the front panel audio I/O module cable to this header.
    • We recommend that you connect a high-definition front panel audio module to this header to avail of the motherboard’s high-definition audio capability.
    • If you want to connect a high-definition front panel audio module to this header, set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this header is set to [HD Audio].
Line In port (light blue).
  • This port connects the tape, CD, DVD player, or other audio sources.
Clear CMOS header
  • This header allows you to clear the CMOS RTC RAM data of the system setup information such as date, time, and system passwords.
  • To erase the RTC RAM:
    • 1. Turn OFF the computer and unplug the power cord.
    • 2. Use a metal object such as a screwdriver to short the two pins.
    • 3. Plug the power cord and turn ON the computer.
    • 4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.
S/PDIF Out header
  • This header is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this header, then install the module to a slot opening at the back of the system chassis.
Memory
  • 4 x DIMM, Max. 128GB, DDR4 2933/2800/2666/2400/2133 MHz Non-ECC, Un-buffered Memory*
  • Dual Channel Memory Architecture
  • Supports Intel® Extreme Memory Profile (XMP)
  • OptiMem
** For 10th Gen Intel® processors, only Core™ i9/i7 CPUs support 2933/2800/2666/ 2400/2133 natively, others will run at the maximum transfer rate of DDR4 2666MHz. **Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
Fan headers
  • Fan headers Chassi
  • The Fan headers allow you to connect fans to cool the system.
LPT header
  • The LPT (Line Printing Terminal) header supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers.
Ethernet port.
  • This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the Ethernet port LED indications.
PS/2 keyboard/mouse combo port.
  • This port is for a PS/2 mouse or keyboard.
USB 3.2 Gen 1 header
  • The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1 header provides data transfer speeds of up to 5 Gb/s.
    • The USB 3.2 Gen 1 module is purchased separately.
LPT header
  • The LPT (Line Printing Terminal) header supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers.
Fan headers
  • Fan headers Chassi
  • The Fan headers allow you to connect fans to cool the system.
Microphone port (pink).
  • This port connects a microphone.
    • Refer to the audio configuration table on the next page for the function of the audio ports in 2, 4, 5.1, or 7.1-channel configuration.
    • To configure a 7.1-channel audio output:
      • Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.
Expansion Slots
  • Intel® 10th Gen Processors
    • 1 x PCIe 3.0 x16 slot (supports x16 mode)
  • Intel® B460 Chipset
    • 2 x PCIe 3.0 x1 slots
DisplayPort.
  • This port is for a DisplayPort-compatible devices.
Line Out port (lime).
  • This port connects a headphone or a speaker. In 4-channel, 5.1-channel, and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
S/PDIF Out header
  • This header is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this header, then install the module to a slot opening at the back of the system chassis.
20-3 pin System Panel header
  • System power LED (2-pin +PWR_LED-)This 2-pin header is for the system power LED. Connect the chassis power LED cable to this header. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Hard disk drive activity LED (2-pin +HDD_LED-)This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED cable to this header. The HDD LED lights up or flashes when data is read from or written to the HDD.
  • System warning speaker (4-pin SPEAKER)This 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
  • ATX power button/soft-off button (2-pin PWR_SW) This header is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the operating system settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
  • Reset button (2-pin RESET)This 2-pin header is for the chassis-mounted reset button for system reboot without turning off the system power.
  • Chassis intrusion header (2-pin CHASSIS)This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this header. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
Power connectors
  • These Power connectors allow you to connect your motherboard to a power supply.
  • The power supply plugs are designed to fit in only one orientation.
  • Find the proper orientation and push down firmly until the power supply plugs are fully inserted.
SATA 6Gb/s ports
  • The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable.
M.2 Slots (Key M)
  • The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
    • M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 & SATA modes).
    • M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4).
    • M.2 slots can support Intel® Optane™ Memory.
    • M.2 slots support data transfer speeds up to 32Gb/s.
    • M.2_2 slot supports IRST (Intel® Rapid Storage Technology).
SATA 6Gb/s ports
  • The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable.
CPU
  • Intel® Socket LGA1200 for 10th Gen Intel® Core™, Pentium® Gold and Celeron® Processors*
  • Supports Intel® 14nm CPU
  • Supports Intel® Turbo Boost Technology 2.0 and Intel® Turbo Boost Max Technology 3.0**
*Refer to www.asus.com for CPU support list.**Intel® Turbo Boost Max Technology 3.0 support depends on the CPU types.
20-3 pin System Panel header
  • System power LED (2-pin +PWR_LED-)This 2-pin header is for the system power LED. Connect the chassis power LED cable to this header. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
  • Hard disk drive activity LED (2-pin +HDD_LED-)This 2-pin header is for the HDD Activity LED. Connect the HDD Activity LED cable to this header. The HDD LED lights up or flashes when data is read from or written to the HDD.
  • System warning speaker (4-pin SPEAKER)This 4-pin header is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings.
  • ATX power button/soft-off button (2-pin PWR_SW) This header is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the operating system settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF.
  • Reset button (2-pin RESET)This 2-pin header is for the chassis-mounted reset button for system reboot without turning off the system power.
  • Chassis intrusion header (2-pin CHASSIS)This header is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this header. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event.
USB 2.0 headers
  • The USB 2.0 headers allow you to connect a USB module for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s connection speed.
    • DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
    • The USB 2.0 module is purchased separately.
Expansion Slots
  • Intel® 10th Gen Processors
    • 1 x PCIe 3.0 x16 slot (supports x16 mode)
  • Intel® B460 Chipset
    • 2 x PCIe 3.0 x1 slots
Memory
  • 4 x DIMM, Max. 128GB, DDR4 2933/2800/2666/2400/2133 MHz Non-ECC, Un-buffered Memory*
  • Dual Channel Memory Architecture
  • Supports Intel® Extreme Memory Profile (XMP)
  • OptiMem
** For 10th Gen Intel® processors, only Core™ i9/i7 CPUs support 2933/2800/2666/ 2400/2133 natively, others will run at the maximum transfer rate of DDR4 2666MHz. **Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists).
Microphone port (pink).
  • This port connects a microphone.
    • Refer to the audio configuration table on the next page for the function of the audio ports in 2, 4, 5.1, or 7.1-channel configuration.
    • To configure a 7.1-channel audio output:
      • Use a chassis with HD audio module in the front panel to support a 7.1-channel audio output.
Ethernet port.
  • This port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the Ethernet port LED indications.
USB 2.0 ports.
  • These 4-pin Universal Serial Bus (USB) ports are for USB 2.0 devices.
USB 3.2 Gen 1 (up to 5Gbps) ports.
  • These 9-pin Universal Serial Bus (USB) ports connect to USB 3.2 Gen 1 devices.
AURA RGB header
  • The RGB header allows you to connect RGB LED strips.
    • The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V), and no longer than 3 m.
    • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
USB 2.0 headers
  • The USB 2.0 headers allow you to connect a USB module for additional USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s connection speed.
    • DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
    • The USB 2.0 module is purchased separately.
DVI-D port.
  • This port is for any DVI-D compatible device.
    • DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with DVI-I.
Front panel audio header
  • This header is for a chassis-mounted front panel audio I/O module that supports HD audio standard. Connect one end of the front panel audio I/O module cable to this header.
    • We recommend that you connect a high-definition front panel audio module to this header to avail of the motherboard’s high-definition audio capability.
    • If you want to connect a high-definition front panel audio module to this header, set the Front Panel Type item in the BIOS setup to [HD Audio]. By default, this header is set to [HD Audio].
DVI-D port.
  • This port is for any DVI-D compatible device.
    • DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with DVI-I.
COM Port header
  • This header is for a serial (COM) port. Connect the serial port module cable to this header, then install the module to a slot opening at the back of the system chassis.
Fan headers
  • Fan headers Chassi
  • The Fan headers allow you to connect fans to cool the system.
Fan headers
  • Fan headers CPU
  • The Fan headers allow you to connect fans to cool the system.
SPI TPM header
  • This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
SATA 6Gb/s ports
  • The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and hard disk drives via a SATA cable.
Power connectors
  • These Power connectors allow you to connect your motherboard to a power supply.
  • The power supply plugs are designed to fit in only one orientation.
  • Find the proper orientation and push down firmly until the power supply plugs are fully inserted.
M.2 Slots (Key M)
  • The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
    • M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4 & SATA modes).
    • M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 3.0 x4).
    • M.2 slots can support Intel® Optane™ Memory.
    • M.2 slots support data transfer speeds up to 32Gb/s.
    • M.2_2 slot supports IRST (Intel® Rapid Storage Technology).