EN-SLP-180 V0

Initial Setup

Advanced Setup

Slumber B

InteractiveSetup Guide

< Back

Start Over

Next

The sound profile is tailored for podcasts & audiobooks, not high-fidelity audio.

Sound Signature

Before we start

A few important notes:

< Back

Got it

Start Over

Ideal Speaker Placement

We recommend placing the Slumber on top of your pillow, inside the pillowcase for minimal sound leakage.

Note: Position the Slumber with the zippered side facing down on your pillow.

My device doesn't have an AUX jack

< Back

It's plugged in

Start Over

Plug, then Play!

Plug the Slumber into your device's 3.5mm AUX jack, then start listening - no pairing or charging required.

< Back

Volume Adjustment

Adjust the volume on both the Slumber and your device to your desired level.

Volume is adjusted

Start Over

Note: The Slumber's volume is adjusted for sleeping and is lower than in regular speakers.

< Back

高度な設定

We hope you enjoy your experience with the Slumber B!If you ever need anything, please don't hesitate to reach out to us at support@avantree.com

You're done!

Add FREE 24-month coverage!

Start Over

Bluetooth-Enabled Version

Activating Mono / Stereo Modes

< Back

How to Wash the Slumber

Advanced Setup

< Back

Remove the cushion & wash the case

Removed & washed

Start Over

To clean the pillowcase, unzip the back, remove the cushion, and hand wash or machine wash the case.

< Back

Put the cushion back inside the pillowcase

Done

Start Over

After washing & drying the case, place the cushion back into the pillowcase, ensuring the "BACK" side faces the zipper.

< Back

Mono & Stereo Modes

Got it

Start Over

You can swap to either mono or stereo mode by toggling the "MONO/STEREO" switch.

Stereo Mode: Two separate audio channels.Mono Mode: One combined audio channel (ideal for side sleepers).

Need help

< Back

Start Over

Got it

If you want a Bluetooth-enabled version...

Slumber 2

Bluetooth Remote

Consider exchanging for the Bluetooth-enabled Slumber 2, or purchase a Bluetooth remote to add to your Slumber B.

Purchase a Bluetooth remote

Got it, take me to setup

Tap the box below to access the purchase link.

< Back

No need for setup

Start Over

Bluetooth Remote

< Back

Plug in the Bluetooth remote and pair

Need help

Start Over

Plug the Slumber B's AUX cable into the remote, then slide the remote's power switch to the "ON" position. The "BT" LED will flash red & blue to indicate pairing mode.

Plugged in & pairing

Bluetooth is enabled

< Back

Start Over

Turn on your Phone's Bluetooth

Go to your phone's Settings, open the Bluetooth menu, and make sure Bluetooth is enabled.

< Back

Avantree Slumber 2 is selected and connected

Start Over

Select "Avantree Slumber 2"

Search for and select "Avantree Slumber 2" in your phone's Bluetooth menu to connect.

< Back

Start Over

OK, I know

For Next Use

For next use, the remote will automatically reconnect to your phone provided that you have not used the headphones with any other Bluetooth device.If fail to reconnect, select "Avantree Slumber 2" on your phone.

Need help

< Back

Start Over

Got it

If your device doesn't have an AUX jack...

You'll need to purchase an adapter to connect to the Slumber B. We recommend a Lightning / Type C audio & charger adapter so you can charge your phone simultaneously.

Lightning Adapter

Type C Adapter

Get support

< Back

Start Over

Reach out to usfor help!

You can email us directly at support@avantree.com, or click the button below to redirect to our support page.We'll get back to you within 1 business day!