AE-200 Installation
lance.hitchins
Created on August 30, 2024
Over 30 million people build interactive content in Genially.
Check out what others have designed:
SLYCE DECK
Personalized
LET’S GO TO LONDON!
Personalized
ENERGY KEY ACHIEVEMENTS
Personalized
HUMAN AND SOCIAL DEVELOPMENT KEY
Personalized
CULTURAL HERITAGE AND ART KEY ACHIEVEMENTS
Personalized
DOWNFALLL OF ARAB RULE IN AL-ANDALUS
Personalized
ABOUT THE EEA GRANTS AND NORWAY
Personalized
Transcript
Centralised Controllers
AE200
The AE200 Centralised Controller can monitor and operate 50 Indoor Fan Coils. The 10.4'' screen is high resolution and touchscreen operated. When connected to a City Multi system with Remote Controllers connected the AE200 is the Master Controller.
- Energy Monitoring
- Web Browser Control
- Direct BACnet Control
- Monitor/Control General Equipment
- Night Setback
- Weekly Scheduling
- Remote Monitoring and Operation
- Group/Batch control of multiple units
- E-Mail Fault notification
AE200
10.4'' Touchscreen
If you have a building with more than 50 Indoor Fan Coils, you can expand the programmable capacity of the AE200 to 200 fan coils with the use of 3 additional EW-50 Centralised controllers
Click on the Red Icon to download the Installation Manual
AE-200 Installation Manual Please click on the above link to download the AE200 Installation Manual
Screws supplied
Decorative Trim
Wall
Screws supplied
Fixing Plate A
Fixing Plate B
Main ControllerInterface
AE-200 Installation
Cover
FixingHooks
PowerSupplyKnockout
M-NetKnockout
AE-200 Wiring Connections
The AE-200 Centralised Controller must be installed in a temperature controlled area and must not be exposed to temperatures ouside of the allowable range (0-40 degrees c)
The M-Net and Power Supply connections are both found on the back of the controller under the etal coverDamage will be caused to the controller if the connections are wired the wrong way round (the 240v power will damage components the DC voltage side of the PCB)
Back of AE-200 Controller