Learning Micro-Course Mobile
Pipefitters Group 2
Created on July 22, 2024
Over 30 million people build interactive content in Genially.
Check out what others have designed:
Transcript
RQF Level 3
ECITB Level 3 Diploma in Installing Engineering Construction Plant and Systems (RQF)
start
Units
Instructions:Prepare the pipe surface using an angle grinder.Ensure proper safety measures are followed.Mark out the pipe to the required specification.Shape the pipe as required by removing material.
Pipe Prepping Using an Angle Grinder (IPS02, IPS03, IPS04, IPS05)
Job 1
Write-Up Requirements
Describe the safety precautions taken during preparation.Explain the marking and shaping process.Document any challenges and how they were overcome. required by removing material.
Pipe Prepping Using an Angle Grinder (IPS02, IPS03, IPS04, IPS05)
Job 1
Next
Instructions:Fabricate and install an expansion loop as per given specifications.Ensure the installation meets all quality standards.
Expansion Loop Fabrication and Installation (IPS05, IPS07, IPS08)
Job 2
Write-Up Requirements
Detail the fabrication steps and tools used.Describe the installation process and how you ensured it was securely positioned.Discuss the importance of expansion loops in pipe systems.
Expansion Loop Fabrication and Installation (IPS05, IPS07, IPS08)
Job 2
Next
Instructions:Perform a hydrostatic pressure test on a pipe system.Follow all safety and testing protocols.
Hydrostatic Pressure Testing (IPS10)
Job 3
Write-Up Requirements
Describe the testing procedure and the equipment used.Report the results and any observed issues.Explain the importance of pressure testing in pipefitting.
Hydrostatic Pressure Testing (IPS10)
Job 3
Next
Assemble a section of screwed pipework as per specifications.Ensure all connections are secure and leak-free.
Assembling Screwed Pipework (IPS02, IPS07)
Job 4
Write-Up Requirements
Outline the assembly steps and tools used.Describe the quality checks performed.Discuss the significance of properly assembled screwed pipework.
Assembling Screwed Pipework (IPS02, IPS07)
Job 4
Next
Instructions:Set up and prepare for butt welding on a pipe system.Ensure alignment and cleanliness of the joint.
Setting Up Butt Welds (IPS02, IPS07, IPS08)
Job 5
Write-Up Requirements
Detail the setup process and preparation steps.Explain the importance of joint alignment and cleanliness.Discuss any issues encountered and how they were resolved.
Setting Up Butt Welds (IPS02, IPS07, IPS08)
Job 5
Next
Instructions:Bend a pipe to a specified angle using hydraulic bending equipment.Follow all safety and operational guidelines.
Hydraulic Pipe Bending (IPS05)
Job 6
Write-Up Requirements
Describe the bending process and the equipment used.Explain the safety precautions taken.Discuss the applications of hydraulic pipe bending in the field.
Hydraulic Pipe Bending (IPS05)
Job 6
Next
Instructions:Install supports for a section of pipework.Ensure supports are properly spaced and secure.
Installing Pipework Supports (IPS08)
Job 7
Write-Up Requirements
Outline the installation steps and types of supports used.Describe how you ensured the supports were secure and properly spaced.Discuss the importance of pipework supports in maintaining system integrity.
Installing Pipework Supports (IPS08)
Job 7
Next
Write-Up Reents
Fabricate a branch on a main pipe as per specifications.Ensure proper fit and alignment. of pipework supports in maintaining system integrity.
Pipe Branch Fabrication (IPS07)
Job 8
Write-Up Requirements
Detail the fabrication process and tools used.Describe the steps taken to ensure proper fit and alignment.Discuss the role of pipe branches in piping systems.
Pipe Branch Fabrication (IPS07)
Job 8
Next
Instructions:Read and interpret isometric drawings for a pipe system.Install valves and flange assemblies as specified.
Reading Isometric Drawings and Installing Valves and Flange Assembly (IPS02, IPS08)
Job 9
Write-Up Requirements
Write-Up Requirements:Describe the process of reading and interpreting isometric drawings.Outline the steps taken to install the valves and flange assemblies.Discuss the importance of accurate installation based on drawings..
Reading Isometric Drawings and Installing Valves and Flange Assembly (IPS02, IPS08)
Job 9
Next
Next
c
Unit Specifications.
IPS04
IPS07
IPS05
IPS01
IPS03
IPS02
c
Unit Specifications.
IPS08
IPS11
IPS10
Next
Use the safety aspects of the jobs you have completed for cross referencing
Assessor notes
Demonstrate understanding and application of health and safety legislation, risk management, productive working relationships, effective communication, quality compliance, ethical working, and environmental sustainability
c
IPS01
Work Safely, Effectively, Ethically, and Sustainably
Next
IPS02: Interpret and Follow Fabrication and Installation DocumentationPrepare and reinstate work areas, handle materials and tools properly, and follow documentation accurately
c
IPS02
Next
IPS03: Mark Out to Required SpecificationUse appropriate tools and techniques to mark out materials precisely.
c
IPS03
IPS04: Shape Components by Material Removal Using Hand ToolsEmploy hand tools effectively to shape components as per specifications.
Next
c
IPS04
Next
IPS05: Forming Materials by Applied PressureUtilise techniques to form materials under pressure accurately.
c
IPS05
Next
IPS07: Assemble ComponentsCombine parts into complete assemblies ensuring fit and function.
c
IPS07
Next
IPS07: Assemble ComponentsCombine parts into complete assemblies ensuring fit and function.
c
IPS07
Next
IPS08: Position and Install Plant, Equipment, and SystemsFollow installation methods, check compliance, and ensure quality control.
c
IPS08
IPS10: Test Performance and Condition of Installed ComponentsConduct tests to verify functionality and integrity of installed systems.
Next
c
IPS10
Next
IPS11: Dismantle Assemblies, Plant, Equipment, and SystemsSafely disassemble components while maintaining system integrity.
c
IPS11
IPS11: Dismantle Assemblies, Plant, Equipment, and SystemsSafely disassemble components while maintaining system integrity.
c
IPS11