Want to create interactive content? It’s easy in Genially!

Get started free

Training - #3935 LMB NINJA

Samantha Joswick

Created on March 22, 2024

Start designing with a free template

Discover more than 1500 professional designs like these:

Smart Quiz

Essential Quiz

Practical Quiz

Akihabara Quiz

Corporate Icebreaker

Retro Bits Quiz

Quick Quiz Universe

Explore all templates

Transcript

Master the #3935 Locking Mounting Bracket (Safety Bracket)

Locking Mounting Brackets are required to safely complete all ceiling track installations
  • We will refer to these as safety brackets
    • Part #3935 - Locking Mounting Brackets
  • They prevent rails from shifting, sliding, or separating.
Next Page

What is a safety bracket?

Next Page
Back

Why even use a safety bracket?

Prevent the installed rails from sliding, shifting, or separating!!
See what can happen if safety brackets are NOT used... RAIL IS SEPARATING
This can cause the motor to get stuck or rail to fall off the bracket! This can be dangerous...
Back
Back
Next Page

Rules for using the safety bracket

  • Safety brackets are required for every ceiling track installation.
  • One safety bracket must be installed in the "end" rail(s) for each line in system
Back
Back
Next Page

You might ask, what is an end rail?

"end" rail #1

Next Page
Back
Back

This example is made up of 3 rails

"end" rail #2

What about systems made with one rail?

One safety bracket is installed here

If the systems contains only one rail, that rail is the end rail

Back
Back
Next Page

Here is an example:

** There is more than 1 rail present**
A safety bracket must be used at each end rail here
Next Page
Back
Back

What about systems containing a traversing rail?

Traversing rail is secured by the traverse kit A modified safetly bracket is included in traverse kit, no need to order one

Only 2 safety brackets will need to be ordered

These will be installed at each end rail

Next Page
Back
Back

Examples:

Next Page
Back
Back

Safety Bracket Ninja QUIZ

start

Question 1/6

Locking Mounting Brackets (safety brackets) prevent the rails from shifting, sliding or separating and eliminate the chance for potential safety issues.

Next

Question 2/6

  • Locking Mounting Brackets are required for every ceiling mounted installation
  • In a single rail installation (1) safety bracket is needed to prevent the rail from shifting or sliding.

Next

Question 3/6

There are 4 "end" rails, therefore 4 safety brackets would be needed for this system

Next

Question 4/6

3 safety brackets are needed, one in the each "end" rail.

Next

Question 5/6

4 safety brackets will be installed in this example
  • One over the toilet
  • One in the rail at foot of the bed (single rail)
  • One in each rail on both sides of the traverse connector
  • A modified safety bracket that is included with the traverse kit
4 safety brackets will need to be ordered for this installation
  • A traverse kit and traverse connector are present here

Remember, a modified safety bracket is included with the traverse kit when ordered

Next

Question 6/6

Safety Brackets are required for every ceiling mounted installation. They lock the rails into place and prevent, shifting, sliding or separating of the rail components

Next

YOU'REA NINJA!

You Did It! Click Here

Mastering #3935 Locking Mounting Brackets

These safety brackets are required for every ceiling track installation

They prevent rails from...

Separating

Shifting

Sliding

One safety bracket must be installed in every "end" rail

All materials needed for a traverse connector is included in the traverse kit, including a modified salefty bracket, no need to order one

#3935 is this safety bracket part number