zum kit advanced

zum kit advanced

START

Olaia Argüello

introductuction

introductuction

Button

Buzzer

Sensors

Fuction of the kit

Exercises

Wire

Servo

Fuction of the kit

Fuction of the kit

This electronic kit is used to create new mechanical designs, with the aim that young people develop their skills using this kit, for example. This kit has more than ten pieces with which to experiment, such as various light and distance sensors, as well as an infrared, light and ultrasound sensor.

SENSORS

SENSORS

Text button

• The infrared sensor; This is used to detect if there is an object in front or even the person. Also for the temperature.
• The light sensor; It is used to detect the intensity of the light in the place and lower the brightness of the screen. This will do it automatically.
• Ultrasonic sensors measure the distance to the object by measuring the time from when the sound was sent until it was received.
• The head delivers an ultrasonic wave and receives the wave returning from the object.

Next

BUZZER

BUZZER

Buzzer is a small transducer that converts electrical energy into sound. To make them work, just connect the positive with the + and the ground or negative with the – of a battery or any direct current source.

BUTTON

BUTTON

BUTTON

Buttons are a mechanism to interact with different gadgets, we can find them in different shapes and sizes, in electrical, electronic and mechanical devices.

LED

IAn LED is a light emitting diode. Inside there is a semiconductor that, when crossed by a continuous voltage, there is light . It's called electroluminescence.

WIRE

WIRE

WIRE

WIRE

BATTERY HOLDER

BATTERY HOLDER

VS

VS

+ info

+ info

Servo

Servo

continuous rotation servo

continuous rotation servo

Servo

Servo

A servo is a device that allows precise control of position and movements. This means that it can move at an angle, position and at a certain speed at all times.

A continuous rotation servomotor is a variant of normal servos in which the signal we send to the motor to control is the rotation speed, instead of the angular position as occurs in conventional servos.

07

04

05

02

03

06

Exercises

Exercises

Exercises

!thanks!

!thanks!

In this excercise I make a trafic light in wich the green ligth is on and red off the barrier uis down 5 seconds then if the light red is on the ligth green is off the barrier down 2 seconds and for let them pass the barier is up since 2 seconds whe te ligth red is on and the green is off.

06

01

Tthis exercise we can seew that if we puss the botton the led swicth on.

05

In this exercise we use the same variable STATE one of 0,1,2,3 an we put in the fuction 1,2,3,4.

03

In this exercise when we puss the button the light sensor deteccts the ligth is on.

02

The light 1 is on for five seconds and the second ligt is of other five seconds.

07

In this exercise I make a sound with the buzzer and with the servo when i puss the botton the sound play. if the button is not presed the servo moves 5 degrees.

04

In this exercise we use variables STATE 0,1,2,3 . In the 0 the light are off In the 1 the light are bliking on of and the other off In the 2 th light are blinking again but on the contary Finaly in the 3 one th both lig are off.

Pontentiometer

A potentiometer is a variable resistor. Potentiometers allow you to regulate and change the current that goes through a circuit. Potentiometers also called power meteres