FLAT TYPE WALL PANEL SYSTEM
WALL PANEL SYSTEMS
WINDOW TYPE PANEL SYSTEM
TILT-UP WALL PANEL SYSTEM
Benefits
- More Cost Effective than Cast-In Walls
- Faster and Safer to Install
- Less Waste and Lowered Environmental Impact
Allows for Some Customization and Architectural
Design
It is a technique of site casting concrete walls or elements, typically done on a horizontal surface
and once cured, it is tilted vertically into place using a mobile crane. it is temporarily braced into its final standing position
and is tied into the building’s roof and flooring system.
Transparent glass and frame incorporated in panel
curtain wall
is a factory - insulated wall system with concealed fasteners for a smooth monolithic appearance
A WALL PANEL is single piece of material, usually flat and cut into a rectangular shape, that serves as the visible and exposed covering for a wall. Wall panels are functional as well as decorative, providing insulation and soundproofing, combined with uniformity of appearance, along with some measure of durability or ease of replacement.
SE R V A N O B S A R 4 C
Benefits
Benefits
- Cost and time efficient
- Allows the fast fabrication of window frames and
glass.
- Has flexible design options
Addresses vulnerabilities
- Increased speed, quality and value
- Enhanced
exterior wall finishing quality control
- Work schedules uninterrupted by weather
- Fast on-site installation
- reduced cost
- asier installation and lower structural
requirements than precast
- Energy efficient and highly durable
- protects against water intrusion
- Enhances energy efficiency and minimizes
thermal bridging
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
Steps
WALL TYPE PANEL SYSTEM
3. The frame is removed.
Workers ready the wall for
lifting. These types of
walls can weigh up to
100,000 pounds.
5. Once placed in its
vertical position, the wall
section is braced. The
workers attach wall to the
roof supports and to the
foundation.
1. At the construction
site, the workers build
a frame for the wall.
This is usually build on
the floor of the
building being built.
Doors, WIndows, and
other openin are
framed in.
RIBBED TYPE WALL PANEL SYSTEM
Consists of performed metal cut
stone, precast concrete or panelized brick wall units,
which may be reglazed or glazed after installation.
A ribbed metal panel has
ribs with sloping sides. It
forms trapezoidal-shaped
voids at the side lap.
4. Rigging is attached. A
crane is used to lift the
wall carefully. Workers use
large braces to steady the
wall as it is raised.
Funding
Benefits
Benefits
2. Reinforcing steel is
placed inside finished
frame. Concrete is
pumped into the wall
frame.
- Easier Installation
- Versatility
- High Performance
- Longevity
- lightweight
- Easy installation
- Wide range of product design
BLUE ONE PAGER
SERVANO, ALLANA MARIE L.
Created on October 28, 2021
Start designing with a free template
Discover more than 1500 professional designs like these:
View
Essential Dossier
View
Essential Business Proposal
View
Essential One Pager
View
Akihabara Dossier
View
Akihabara Marketing Proposal
View
Akihabara One Pager
View
Vertical Genial One Pager
Explore all templates
Transcript
FLAT TYPE WALL PANEL SYSTEM
WALL PANEL SYSTEMS
WINDOW TYPE PANEL SYSTEM
TILT-UP WALL PANEL SYSTEM
Benefits
It is a technique of site casting concrete walls or elements, typically done on a horizontal surface and once cured, it is tilted vertically into place using a mobile crane. it is temporarily braced into its final standing position and is tied into the building’s roof and flooring system.
Transparent glass and frame incorporated in panel curtain wall
is a factory - insulated wall system with concealed fasteners for a smooth monolithic appearance
A WALL PANEL is single piece of material, usually flat and cut into a rectangular shape, that serves as the visible and exposed covering for a wall. Wall panels are functional as well as decorative, providing insulation and soundproofing, combined with uniformity of appearance, along with some measure of durability or ease of replacement.
SE R V A N O B S A R 4 C
Benefits
Benefits
Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh
Steps
WALL TYPE PANEL SYSTEM
3. The frame is removed. Workers ready the wall for lifting. These types of walls can weigh up to 100,000 pounds.
5. Once placed in its vertical position, the wall section is braced. The workers attach wall to the roof supports and to the foundation.
1. At the construction site, the workers build a frame for the wall. This is usually build on the floor of the building being built. Doors, WIndows, and other openin are framed in.
RIBBED TYPE WALL PANEL SYSTEM
Consists of performed metal cut stone, precast concrete or panelized brick wall units, which may be reglazed or glazed after installation.
A ribbed metal panel has ribs with sloping sides. It forms trapezoidal-shaped voids at the side lap.
4. Rigging is attached. A crane is used to lift the wall carefully. Workers use large braces to steady the wall as it is raised.
Funding
Benefits
Benefits
2. Reinforcing steel is placed inside finished frame. Concrete is pumped into the wall frame.