Want to create interactive content? It’s easy in Genially!

Get started free

Controller interfaces

DEP | MITSUBISHI ELECTRIC EUROPE | UK

Created on June 15, 2021

Start designing with a free template

Discover more than 1500 professional designs like these:

Smart Presentation

Practical Presentation

Essential Presentation

Akihabara Presentation

Pastel Color Presentation

Visual Presentation

Relaxing Presentation

Explore all templates

Transcript

Controller interfaces

3 wired adaptor - PAC-SA89TA

The PAC-SA89TA 3 wire adaptor is commonly used to control the On/Off control demand of a P-series indoor fan coil from an external source Common uses include:

  • BMS On/Off control
  • Fire alarm shutdown
  • Hotel room key card activation
  • Window latch integration
  • Last man out switch
  • External time clock connection

Click here for more information

5 wired adaptor - PAC-SA88HA

The PAC-SA88HA 5 wire adaptor is commonly used to send out run and fault signals from a P-series indoor fan coil to an external source Common uses include:

  • Integration to BMS panels and systems
  • External run indicators
  • External fault indicators
  • External monitoring of system run and fault status
  • Integration to leak detection systems

Click here for more information

PAC-SJ95/96 M-net adaptor

P-series systems can be adapted to connect with an M-net for centralised controller operation The type of interface required depends on the model of P-series unit you have installed The PAC-SJ96 connects to the smaller models of P-series systems such as 3.5kw and 5kw The PAC-SJ95 interface connects to all compatible units bigger than the 5kw system The interface connects to the P-series outdoor unit

AE200 Centralised controller

M-net

PAC-SJ96

Click here for more information

BMS interface - MelcoBEMS

The MelcoBEMS interface provides M-Net connection from the Mitsubishi AE200/EW50 centralised controllers to a third party BEMS via either RS485 or TCP/IP It can achieve this controls integration through Modbus RTU or BACnet interfaces The MelcoBEMS interface allows monitoring and control of up to 50 indoor fan coils

Click here for more information

BMS interface - MelcoBEMS mini

The MelcoBEMS mini interface allows individual indoor fan coil connection to third party BMS systems via the RS485 connection The interface allows communication with both Modbus RTU and Bacnet controls languages This allows the third party BMS system to send control demands to the Mitsubishi unit and also monitor the operational status and fault condition of the system

RS485

Click here for more information